Bedienungsanleitung DeLonghi ECAM 350.55 - Dinamica (Seite 5 von 21) (Englisch)

709060

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

• Arrange the cord (C7) in such a way that it cannot be dam-

aged by sharp edges or contact with hot surfaces (e.g. elec-

tric hot plates).

5.3 Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to that

indicated on the rating plate on the bottom of the appliance.

Connect the appliance to an eciently earthed and correctly

installed socket with a minimum current rating of 10A only.

If the power socket does not match the plug on the appliance,

have the socket replaced with a suitable type by a qualied

professional.

5.4 Setting up the appliance

Please note:

• Coee has been used to factory test the appliance and it is

therefore completely normal for there to be traces of cof-

fee in the mill. The machine is, however, guaranteed to be

new.

• You should customise water hardness as soon as possible

following the instructions in section “16. Setting water

hardness”.

Plug the power cord (C7) connector into the socket (A21) at

the back of the appliance and connect the appliance to the

mains electricity supply (g. 1). Make sure the main switch

(A22) at the back of the appliance is pressed (g. 2);

2. "Language": press the selection arrow (B2) until the re-

quired language is displayed between the two dotted

lines, then press OK (B3) to conrm.

Then follow the instructions indicated on the appliance display

(B1):

3. “Fill tank”: remove the water tank (A17), ll to the MAX

line with fresh water (g. 3A), then replace in the appli-

ance (g. 3B);

4. "Insert water spout": Check that the hot water spout (C6)

is inserted on the connection nozzle (A8) (g. 4) and place

a container holding a minimum of 100 ml underneath (g.

5);

5. "Water circuit empty, Fill water circuit, Hot water,

Conrm?";

6. Press the OK button to conrm. The appliance delivers hot

water from the spout then goes o automatically.

The coee machine is now ready for normal use.

Please note:

• The rst time you use the coee maker, you need to make

4-5 cups of coee or 4-5 cappuccinos before it starts to give

satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear

the noise of boiling water. After this, the noise becomes

less.

• To enjoy your coee even more and improve the perfor-

mance of your appliance, we recommend installing a

water softener lter (C4) as described in section “17. Water

softener lter”. If your model is not provided with a lter,

you can request one from De'Longhi Customer Services.

6. TURNING THE APPLIANCE ON

Please note:

Before turning the appliance on, make sure the main switch

(A22) on the back of the appliance is pressed (g. 2).

Each time the appliance is turned on, it performs an automatic

preheat and rinse cycle which cannot be interrupted. The appli-

ance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

(A9) and is collected in the drip tray (A15) underneath. Avoid

contact with splashes of water.

• To turn the appliance on, press the button (A7) (g.

6). The message "Heating Please wait" appears on the dis-

play (B1).

After heating, the message "Rinsing" is displayed, together with

a progress bar which gradually lls as preparation proceeds. As

well as heating the boiler, the appliance also heats the internal

circuits by circulating hot water.

The appliance is at temperature when the message "Select your

beverage" is displayed.

7. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to

make coee, it performs an automatic rinse cycle.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts

(A9). Avoid contact with splashes of water.

• To turn the appliance o, press the button (A7) (g.

6);

• The message "Turning o underway Please wait" appears

on the display (B1), then the appliance performs a rinse

cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug

from the mains socket:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM 350.55 - Dinamica Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM 350.55 - Dinamica

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info