Bedienungsanleitung DeLonghi ECAM23.420 (Seite 12 von 16) (Englisch)

532861

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Please note:

Use De’Longhi descaler only.

Under no circumstances should you use sulpha-

mic or acetic based descalers. Their use invalida-

tes the guarantee.

Failure to descale the appliance as described also

invalidates the guarantee.

1. Turn the machine on.

2. Press the P button to enter the menu.

3. Turn the selection knob until “Descaling” is

displayed.

4. Select by pressing the button: “DESCA-

LING CONFIRM?” is displayed. Press

again to activate the function.

5. The message “INSERT DESCALER CON-

FIRM?” is displayed.

6. Completely empty the water tank (A9) and

remove the water softener ﬁlter (if present).

7. Pour the descaler into the tank up to the level

A (corresponding to a 100 ml pack) marked

on the back of the tank (ﬁg. 29A), then add

water up to level B (ﬁg. 29B).

8. Place an empty container with a minimum

capacity of 1.5 litres under the cappuccino

maker (A19) (ﬁg. 4).

Important! Danger of burns

Hot water containingacid ows from the cap-

puccino maker.

Avoid contact with splashes of water.

9. Press the button to conﬁrm introduc-

tion of the solution. “Turn steam knob” is

displayed.

10. Turn the steam knob to the I position (ﬁg.

4). The descaling programme starts and the

descaler liquid comes out of the cappuccino

maker. The descale programme automatical-

ly performs a series of rinses and pauses to

remove limescale deposits from inside the

machine.

After about 30 minutes, the message “FILL

TANK!”isdisplayed.Theapplianceisnowready

for rinsing through with clean water.

11. Empty the container used to collect the de-

scaler solution and replace it empty under

the cappuccino maker.

12. Remove the water tank, empty, rinse under

running water, ﬁll with clean water and repla-

ce. “Rinsing” is displayed.

13.Hotwatercomesoutofthecappuccinoma-

ker.

14. When the water tank is completely empty,

“TURNSTEAMKNOB”isdisplayed.

15. Turn the knob to the 0 position, insert the ﬁl-

ter in the tank (if present), ﬁll the water tank

again and the appliance is ready for use.

SETTING WATER HARDNESS

The DESCALE message is displayed after a period

of time established according to water hardness.

The machine is factory set for a hardness value

of 4. The machine can also be programmed ac-

cording to the hardness of the mains water in the

various regions so that the machine needs to be

descaled less often.

Measuring water hardness

1. Removethe“TOTALHARDNESSTEST”indi-

cator paper attached to this manual from its

pack.

2. Immerse the paper completely in a glass of

water for one second.

3. Remove the paper from the water and shake

lightly. After about a minute, 1, 2, 3, or 4 red

squares form, depending on the hardness of

the water. Each square corresponds to one

level.

Level 1

Level 2

Level 3

Level 4

Set water hardness

1. Press the P button to enter the menu.

2. Turn the selection knob to select “WATER

HARDNESS”.

3. Conﬁrm the selection by pressing the

button.

4. Turn the selection knob and set the level

shown by the indicator paper (see previous

paragraph).

5. Press the button to conﬁrm the setting.

6. Press the button to exit the menu.

Leva grande

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM23.420 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM23.420

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info