Bedienungsanleitung DeLonghi ECAM23.450 (Seite 11 von 25) (Englisch)

532862

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

 

the performance of your appliance, we re-

commend installing a water softener ﬁlter as

described in the section “WATER SOFTENER

FILTER”. If your model is not provided with

a ﬁlter, you can request one from De’Longhi

Customer Services.

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the

main switch on the back of the appliance is in the

I position (ﬁg. 1).

Each time the appliance is turned on, it performs

an automatic preheat and rinse cycle which can-

not be interrupted. The appliance is ready for

use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the

coffee spouts and is collected in the drip tray un-

derneath. Avoid contact with splashes of water.

       

button (ﬁg. 5). The message “Heating

up... Please wait” is displayed.

After heating, the message “Rinsing...” is displa-

yed. As well as heating the boiler, the appliance

also heats the internal circuits by circulating hot

water.

The appliance is at temperature when a message

indicating the coffee taste and quantity is displa-

yed.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs

an automatic rinse cycle which cannot be inter-

rupted.

Danger of burns!

During rinsing, a little hot water ﬂows from the

coffee spouts.

Avoid contact with splashes of water.

To turn the appliance off, press the button

(ﬁg. 5). The appliance performs a rinse cycle,

then the message “Turning Off Please wait...” is

displayed and the appliance goes off.

Please note!

If the appliance is not used for an extended pe-

riod, also place the main switch in the 0 position

(ﬁg. 6).

Important!

To avoid damaging the appliance, never place the

main switch (ﬁg. 6) in the 0 position while the

appliance is on.

MENU SETTINGS

When you access the programming menu by pressing

the P button, the following menu items are available:

Descale

For instructions on descaling, see page 18.

Adjust time

To adjust the time on the display, proceed as fol-

lows:

1. Press the P button to enter the menu;

2. Turn the selection knob (ﬁg. 8) until “Adjust

time” is displayed;

3. Press the button (ﬁg. 2);

4. Turn the selection knob (ﬁg. 8) to change the

hours;

5. Press the button to conﬁrm;

6. Turn the selection knob (ﬁg. 8) to change the

minutes;

7. Press the button to conﬁrm.

This sets the time. Press the button to exit

the menu.

Auto-off

The appliance is set to turn off automatically if

not used for 2 hours.

The time can be changed so that the appliance

switches off after 15 or 30 minutes, or after 1,

2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1. Press the P button to enter the menu;

2. Turn the selection knob (ﬁg. 8) until “Auto-

off” is displayed;

3. Press the button;

4. Turn the selection knob (ﬁg. 8) until the de-

sired operation time is displayed (15 or 30

minutes, or 1, 2 or 3 hours);

5. Press the button to conﬁrm;

6. Press the button to exit the menu.

Auto-off is programmed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM23.450 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM23.450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info