Bedienungsanleitung DeLonghi ECAM23.450 (Seite 19 von 25) (Englisch)

532862

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Please note!

Use De’Longhi descaler only.

Under no circumstances should you use sulpha-

mic or acetic based descalers. Their use invalida-

tes the guarantee. Failure to descale the applian-

ce as described also invalidates the guarantee.

1. Turn the machine on and wait for the applian-

ce to be ready for use.

2. Press the P button to enter the menu.

3. Turn the selection knob until “Descaling” is

displayed.

4. Select by pressing the button: Descaling

Conﬁrm?” is displayed. Press again to

activate the function.

5. The message “Add descaler Conﬁrm?” alter-

nating to “EMPTY GROUNDS CONTAINER”

6. Completely empty the water tank (A9) and

remove the water softener ﬁlter (if present);

then empty the drip tray and the empty

grounds container and re-insert them.

7. Pour the descaler into the tank up to the level

A (corresponding to a 100 ml pack) marked

on the back of the tank (ﬁg. 29A), then add

water (one litre) up to level B (ﬁg. 29B); rein-

sert the water tank.

8. Place an empty container with a minimum

capacity of 1.5 litres under the hot water

spout (ﬁg. 4).

ImportantDanger of burns

Hot water containing acid ﬂows from the cap-

puccino maker.

Avoid contact with splashes of water.

9. Press the button to conﬁrm introduction

of the solution.

The message “Descaling...” is displayed.

The descaling programme starts and the de-

scaler liquid comes out of the water spout.

The descale programme automatically per-

forms a series of rinses and pauses to remo-

ve limescale deposits from inside the machi-

ne.

Please note!

It is normal that the appliance is inactive for seve-

ral minutes between once rinsing and the other.

After about 30 minutes, the message “FILL



7. The appliance is now ready for rinsing throu-

the “INSERT” position

(see ﬁgure) and pull it

off upwards.

4. Wash all the compo-

nents thoroughly with

hot water and mild

washing-up liquid.

All components are

dishwasher safe, pla-

cing them in the top

basket of the dishwa-

sher.

Make sure there are

no milk residues in

the hollow and groove

under the knob (see

ﬁgure alongside). If

necessary, scrape the

groove with a too-

thpick.

5. Rinse the inside of the

froth adjustment knob

under running water

(see ﬁgure alongsi-

de).

6. Check that the intake

tube and spout are

not clogged with milk

residues.

7. Replace the knob (lining up the arrow with

the word “INSERT”) the spout and the milk

intake tube.

8. Place the lid back on the milk container.

Cleaning the hot water/steam nozzle

Each time you prepare milk, clean the nozzle with

a sponge to remove milk residues from the ga-

skets (see ﬁgure).

DESCALE

Descale the machine when the message “DE-



Important!

Descaler contains acids which may irritate the

skin and eyes.

It is vital to respect the manufacturer’s safety

warnings given on the descaler pack and the

warnings relating to the procedure to follow in

the event of contact with the skin and eyes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM23.450 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM23.450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info