Bedienungsanleitung DeLonghi ECAM250.41 - Magnifica S Smart (Seite 10 von 13) (Englisch)

770020

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

11. Empty the container used to collect the rinsing water. Re-

move the water tank, replace the water softener lter (if

removed previously), ll the tank up to the MAX level with

cold water and insert in the appliance. The steam

light ashes.

12. Place the container used to collect the rinsing water empty

under the cappuccino maker;

13. Turn the steam/hot water dial to the I position. Rinsing

continues from the cappuccino maker only.

14. When it nishes, the steam light ashes on the con-

trol panel. Turn the steam/hot water dial to the 0 position.

15. Top up the water tank with fresh water to the MAX level

and put back in the machine.

The descaling cycle is now complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A13) to contain water;

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been completely

eliminated from the machine's internal circuits.

18. SETTING WATER HARDNESS

Descaling is necessary after a period of operation established

according to the water hardness set.

The machine is set by default for a hardness level of 4. The ma-

chine can also be programmed according to the hardness of the

mains water in the various regions so that the machine needs to

be descaled less often.

18.1 Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper (C1)

from its pack (attached to the English instructions);

2. Immerse the paper completely in a glass of water for one

second;

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level;

Indicator paper Water

hard-

ness

Corresponding

setting

low

medium

high

maxi-

mum

18.2 Setting water hardness

1. Make sure the appliance is o (but connected to the mains

electricity supply and with the main switch (A6) in the I

position);

2. Press and hold the button (B5) for at least 5 seconds.

The , , and lights come on together;

3. Press the button (B2) to set the actual water hardness

(as measured by the indicator paper - see table in previous

section).

4. Press the / button (B9) to conrm the selection.

The machine is now reprogrammed with the new water hard-

ness setting.

19. TECHNICAL DATA

Voltage: 220-240 V~ 50/60 Hz max. 10A

Absorbed power: 1450W

Pressure: 1.5MPa (15 bars)

Max. water tank capacity: 1.8 l

Size LxDxH: 240x440x360 mm

Cord length: 1150 mm

Weight: 9.2 kg

Max. beans container capacity: 250 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM250.41 - Magnifica S Smart Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM250.41 - Magnifica S Smart

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info