Bedienungsanleitung DeLonghi ECAM370.70 - Dinamica Plus (Seite 7 von 28) (Englisch)

770001

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Please note!

If you will not be using the appliance for some time, unplug

from the mains socket:

1. First turn the appliance o by pressing the button

(g. 8);

2. Release the main switch (A22) at the back of the appliance

(g. 2).

Important!

Never press the main switch while the appliance is on.

6. MENU SETTINGS

6.1 Access the settings menu

1. Press the " " button (C3) to enter the menu;

2. Scroll through the menu items by pressing

until the required items is displayed;

3. Press the menu item you want to select.

6.2 Exit the menu

When you have made the adjustments, press

until you are back on the homepage.

6.3 Rinse

Use this function to deliver hot water from the coee spouts

(A9) and hot water spout (D6), if inserted, to clean and heat the

appliance’s internal circuit.

1. Place a container with a minimum capacity of 100ml under

the coee and hot water spouts (g. 8).

2. A few seconds after the "RINSING" item has been selected,

hot water is delivered rst from the coee spouts and then

from the hot water spout (if inserted) which cleans and

heats the appliance’s internal circuit (g. 7).

3. To stop rinsing, press or wait for rinsing to

stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when

you turn it on again, we strongly recommend performing

2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A11)

to contain water.

6.4 Descaling

For instructions on descaling, see section "13. Descaling".

6.5 Water lter

For instructions on how to install the lter (D7), see section "15.

Water softener lter".

6.6 Beverages settings

In this section, you can consult your customised settings and, if

you wish, reset the default values for each beverage.

1. Once in the settings menu, press "DRINK SETTINGS". The

values for the rst beverage appear on the display;

2. The values are displayed on vertical bars. The default value

is indicated by the symbol, while the current value is

highlighted by the solid part of the vertical bar;

3. To go back to the settings menu, press . To

scroll and display the beverages, press ;

4. To reset the default values for the beverage displayed,

press ;

5. "CONFIRM RESET?": to conrm, press (to

cancel, press );

6. "VALORI FABBRICA""IMPOSTATI": press .

The beverage has been reset to the default values. Proceed with

the other beverages or go back to the homepage by pressing

twice.

6.7 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30

minutes, or 1, 2 or 3 hours.

To programme Auto-o, proceed as follows:

1. Press "AUTO-OFF";

2. Select the required time interval by pressing the selection

arrows (increase) or (decrease);

3. To conrm, press .

Auto-o is now programmed.

6.8 Energy saving

Use this function to enable or disable energy saving. When en-

abled, the function reduces energy consumption in compliance

with European regulations.

To disable or enable "Energy Saving", proceed as follows:

1. Press "ENERGY SAVING" to disable ( ) or enable (

) the function;

The corresponding symbol (B1) appears on the top bar of the

homepage to indicate that the function has been enabled.

Please note:

If energy saving is active, you may have to wait a few seconds

before delivery.

6.9 Coee temperature

To change the temperature of the water used to make the cof-

fee, proceed as follows:

1. Press "COFFEE TEMPERATURE"

. The selectable values

appear on the display (B1) (the current value is underlined);

2. Press the value you want to set (LOW, MEDIUM, HIGH).

Please note:

Varying the temperature has most eect for long beverages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM370.70 - Dinamica Plus Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM370.70 - Dinamica Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info