Bedienungsanleitung DeLonghi ECAM550.85 Prima Donna Class (Seite 9 von 22) (Englisch)

770028

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

4. Turn the dial back to one of the froth selections;

5. Remove the milk container and always clean the steam

connection nozzle (A9) with a sponge (g. 21).

Please note!

• To prepare a number of cappuccinos or milk-based coees,

clean the milk container after you have prepared the last

beverage only. To proceed with making the next beverag-

es, when the "CLEAN message is displayed, press the selec-

tor corresponding to “ ESC”.

If you do not clean the milk container, the symbol appears

on the display to remind you that it needs cleaning.

• The milk container can be kept in the refrigerator.

• In some cases, before cleaning you must wait for the appli-

ance to heat up.

9. DELIVERING HOT WATER

1. Make sure the hot water/steam spout (C6) is attached cor-

rectly to the hot water/steam connection nozzle (A9);

2. Place a container under the spout (as close as possible to

avoid splashes);

3. Press the selector (B2) corresponding to the " " symbol

(B3) to enter the menu;

4. Press the selector corresponding to the "NEXT>" symbol

until "HOT WATER" is displayed;

5. Press the selector corresponding to " HOT WATER". The cor-

responding image appears on the display (B1), together

with a progress bar which lls gradually as preparation

proceeds;

6. The machine delivers hot water, then delivery stops auto-

matically. To interrupt hot water delivery manually, press

the selector corresponding to " STOP" again.

Please note!

•

If "Energy Saving" mode is active, you may have to wait a few

seconds before hot water is delivered.

• Preparation of each coee can be customised (see sec-

tions”12. Customising the beverages ”and “13. Memoris-

ing your personal prole”).

10. STEAM DELIVERY

1. Make sure the hot water/steam spout (C6) is attached cor-

rectly to the hot water/steam connection nozzle (A9);

2. Fill a container with the liquid to be heated or frothed and

immerse the hot water/steam spout in the liquid;

3. Press the selector (B2) corresponding to the " " symbol

(B3) to enter the menu;

4. Press the selector (B2) corresponding to the "NEXT>" sym-

bol until "STEAM" appears on the display;

5. Press the selector corresponding to "STEAM". The corre-

sponding image appears on the display (B1), together with

a progress bar which lls gradually as preparation proceeds

and after a few seconds, steam to heat the liquid is deliv-

ered from the cappuccino maker;

6. When the required temperature or froth level is obtained,

interrupt steam delivery by pressing the selector corre-

sponding to " STOP".

Important!

Always stop steam delivery before extracting the container con-

taining the liquid to avoid burns from splashes.

Please note!

If "Energy Saving" mode is active, you may have to wait a few

seconds before the hot water is delivered.

10.1 Tips for using steam to froth milk

• When choosing the size of the container, bear in mind that

the liquid doubles or triples in volume.

• For a richer denser froth, use skimmed or partially skimmed

milk at refrigerator temperature (about 5°C).

• For a creamier froth, rotate the container with slow move-

ments in an upward direction.

• To avoid milk with poor froth or large bubbles, always clean

the spout (C6) as described in the following section.

10.2 Cleaning the hot water/steam spout after

use

Always clean the hot water/steam spout (C6) after use to avoid the

build-up of milk residues and prevent it from clogging.

Place a container under the hot water/steam spout and de-

liver a little water (see section “9. Delivering hot

water”). To interrupt hot water delivery manually, press the

selector (B2) corresponding to " STOP".

2. Wait a few minutes for the hot water/steam spout to cool

down, then extract (g. 16) by pressing the release button

(C7). Hold the spout with one hand and with the other,

turn the cappuccino maker and pull it downwards (g. 22).

3. Also remove the steam connection nozzle by pulling it

downwards (g. 23).

4. Check the hole in the connection nozzle is not blocked. If

necessary, clean using a toothpick.

5. Wash all parts of the spout thoroughly with a sponge and

warm water.

6. Insert the connection nozzle and cappuccino maker on the

spout by pushing them upwards and turning them clock-

wise until they are attached.

11. TEA FUNCTION

1. Make sure the hot water/steam spout (C6) is attached cor-

rectly to the hot water/steam connection nozzle (A9);

2. Put a tea bag in the cup, then place the cup under the spout

(as close as possible to avoid splashes);

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM550.85 Prima Donna Class Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM550.85 Prima Donna Class

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info