Bedienungsanleitung DeLonghi ECAM610.75 Prima Donna Soul (Seite 9 von 32) (Englisch)

769694

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

4. Press "←" to save the new selection and go back to the

homepage (B).

6.9 General

1. Press the settings menu (B6);

2. Select "General";

Here you can enable or disable the following functions with a

simple touch:

- "Beep": when enabled, the appliance beeps whenever an

operation is performed.

- "Energy saving": use this function to enable or disable en-

ergy saving. When enabled, the function reduces energy

consumption in compliance with European regulations.

When enabled, the symbol appears on the icon in the

settings menu (B6).

6.10 Water lter

For instructions on the lter (C7), see section “19. Water softener

lter u”.

6.11 Water hardness

For instructions on setting water hardness, see section “18. Set-

ting water hardness u”.

6.12 Default values

This resets all menu settings and user customisation back to

the default values (with the exception of the language, which

remains as set, and the statistics).

Proceed as follows:

1. Press the settings menu (B6);

2. Select "Default values";

- To reset the appliance to the default values, press "OK";

otherwise to reset the individual prole, press the arrow

to pass to the next screen, select the prole to reset and

press "OK";

3. Press "OK" again to conrm the reset to default values;

4. Press "OK" to exit the menu and go back to the homepage

(B).

Please note:

When the appliance (not the individual prole) has been reset

to the default values, the machine proposes the introductory

video again.

6.13 Emptying the circuit

To avoid the water in the circuit freezing if the appliance is to be

left idle for a long period of time, or before taking it to customer

services, we recommend emptying the water circuit.

Proceed as follows:

1. Press the settings menu (B6);

2. Select "Empty water circuit";

3. Press "OK" to start the guided procedure;

4. Empty the grounds container (A25) and drip tray (A24) (g.

11), then press "Next";

11 12

5. Insert the spout (C7) on the milk container connector (A13)

(g. 7);

6. Position a 0.5 litre container under the spout (g. 8). Press

"OK";

7. The appliance performs a rinse cycle with hot water from

the spouts;

8. At the end of rinsing, remove the water tank (A20) (g. 12)

and empty; if present, remove the water softener lter (C7)

from the water tank and press "Next";

9. Put the empty water tank back in the appliance and press

"OK";

10. Wait for the appliance to empty the circuit; (Important:

hot water from the spouts!). As the water circuit empties,

the appliance could become noisier. This is part of normal

operation.

11. When the circuit is empty, extract and empty the drip tray,

put back in the appliance and press "Next";

12. Press "OK". The appliance goes o (standby).

The next time the appliance is turned on, follow the instructions

in section “3. Setting up the appliance U”.

6.14 Statistics

This displays statistics relating to the machine. To view the sta-

tistics, proceed as follows:

1. Press the settings menu (B6);

2. Select "Statistics". To display the information and scroll be-

tween screens, press "Next" or "Back".

3. Press "←" to go back to the homepage (B).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM610.75 Prima Donna Soul Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM610.75 Prima Donna Soul

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info