Bedienungsanleitung DeLonghi Eletta Cappuccino - ECAM44.660.B (Seite 10 von 23) (Englisch)

709067

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

not use the appliance if it is visibly damaged. Contact De’Longhi

Customer Services.

Installing the appliance

Important!

When you install the appliance, you should respect the follow-

ing safety warnings:

• The appliance gives o heat. After positioning the appli-

ance on the worktop, leave a space of at least 3 cm be-

tween the surfaces of the appliance and the side and rear

walls and at least 15 cm above the coee machine.

• Water penetrating the appliance could cause damage. Do

not place the appliance near taps or sinks.

• The appliance could be damaged if the water it contains

freezes. Do not install the appliance in a room where the

temperature could drop below freezing point.

• Arrange the power cable in such a way that it cannot be

damaged by sharp edges or contact with hot surfaces (e.g.

electric hot plates).

Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to

the value indicated on the rating plate on the bottom of the

appliance.

Connect the appliance to an eciently earthed and correctly

installed socket with a minimum current rating of 10A only.

If the power socket does not match the plug on the appliance,

have the socket replaced with a suitable type by a qualied

professional.

Setting up the appliance

Please note!

• Coee has been used to factory test the appliance and it is

therefore completely normal for there to be traces of cof-

fee in the mill. The machine is, however, guaranteed to be

new.

• You should customise water hardness as soon as possible

following the Instruction for use in the section “Setting

water hardness” on page 11.

1. Plug the power cable into the socket on the back of the ap-

pliance, connect the appliance to the mains power supply

(g. 1) and make sure that the main switch, located at the

back of the appliance, is pressed (g. 2).

Select the desired language by scrolling forwards or backwards

using the the arrows or (g. 9), or alternatively waiting

for the language options to scroll automatically on the display

(about every 3 seconds):

2. When “English” appears, hold the OK button (g. 3) for a

few seconds until “English set” is displayed.

Follow the instructions indicated on the appliance display:

3. “FILL TANK”: extract the water tank (g. 4), open the lid

(g. 5), ll to the MAX line with fresh water (g. 6); close

the lid again and then replace the tank.

4. “INSERT WATER SPOUT!”: Check that the hot water spout

is inserted on the connection nozzle and place a container

holding a minimum of 100 ml underneath (g. 7).

5. “HOT WATER, Press OK” is displayed;

6. Press the OK button to conrm (g. 3). The appliance deliv-

ers water from the spout then goes o automatically.

The coee machine is now ready for normal use.

Please note!

• When using the appliance for the rst time, you need to

make 4-5 cups of coee or 4-5 cappuccinos before it starts

to give satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear

the noise of boiling water. After this, the noise becomes

less.

• To enjoy your coee even more and improve the perfor-

mance of your appliance, we recommend installing a water

softener lter as described in the section “WATER SOFTEN-

ER FILTER” (page 18).

If your model is not provided with a lter, you can request

one from De’Longhi Customer Services.

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch is

pressed (g. 2).

Each time the appliance is turned on, it performs an automatic

preheat and rinse cycle which cannot be interrupted.

The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

and is collected in the drip tray underneath.

Avoid contact with splashes of water.

• To turn the appliance on, press the button (g. 8).

The message “Heating up, Please wait” is displayed.

After heating, the message “Rinsing” is displayed. As well as

heating the boiler, the appliance also heats the internal circuits

by circulating hot water.

The appliance is at temperature when the message indicating

the taste and quantity of coee appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Eletta Cappuccino - ECAM44.660.B Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Eletta Cappuccino - ECAM44.660.B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info