Bedienungsanleitung DeLonghi ESAM 04.110 (Seite 17 von 22) (Englisch)

532868

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

red buttons have snapped out.

8. Close the infuser door.

9. Replace the water tank.

DESCALING

Descale the appliance when the light on the

panel ﬂashes.

Important!

Descaler contains acids which may irritate the

skin and eyes.

It is vital to respect the manufacturer’s safety

warnings given on the descaler pack and the

warnings relating to the procedure to follow in

the event of contact with the skin and eyes.

Please note:

Use De’Longhi descaler only.

Under no circumstances should you use sulpha-

mic or acetic based descalers. Their use invalida-

tes the guarantee.

Failure to descale the appliance as described

above also invalidates the guarantee.

1. Turn the machine on.

2. Empty the water tank (A12).

3. Pour the descaler diluted with water (respec-

ting the proportions indicated on the desca-

ler pack) into the water tank.

Place an empty container with a minimum

capacity of 1.5 litres under the hot water

spout.

4. Wait for the

and lights to come

on steadily.

Important! Danger of burns

Hot water containing acid ﬂows from the cap-

puccino maker. Avoid contact with splashes of

water.

5. Press the

button and hold it down for

at least 5 seconds to conﬁrm that you have

added the solution and begin the descaling

procedure. The light in the button remains

on steadily to indicate that the descaling

programme has begun (the

and

lights go out as coffee cannot be made).

6. Turn the steam knob a half turn anticlockwi-

se. The descaler solution ﬂows out of the

cappuccino maker into the underlying con-

tainer.

The descale programme automatically per-

forms a series of rinses and pauses to remo-

ve limescale deposits from inside the machi-

ne.

After about 30 minutes, the water tank is empty

and the

light comes on. Turn the steam knob

a half turn clockwise as far as it will go.

The appliance is now ready for rinsing through

with clean water.

11. Empty the container used to collect the de-

scaler solution and replace it empty under

the cappuccino maker.

12. Remove the water tank, empty, rinse under

running water, ﬁll with clean water and repla-

ce.

13. Turn the steam knob a half turn anticlockwi-

se. Hot water comes out of the spout.

14. When the water tank is completely empty,

the

light goes out and the light co-

mes on.

15. Turn the knob to the 0 position, ﬁll the water

tank again and the appliance goes off auto-

matically.

To use the appliance, turn it on by pressing the

button.

SETTING WATER HARDNESS

The message comes on after a period of

time established according to water hardness.

The machine is set by default for a hardness va-

lue of 4 (very hard water).

The machine can also be programmed according

to the hardness of the mains water in the various

regions so that the machine needs to be descaled

less often.

Measuring water hardness

£°Ê ,iÛiÊÌiÊº/"/Ê, --Ê/-/»Ê`-

cator paper attached to this manual from its

pack.

2. Immerse the paper completely in a glass of

water for one second.

3. Remove the paper from the water and shake

lightly. After about a minute, 1, 2, 3, or 4 red

squares form, depending on the hardness of

the water. Each square corresponds to one

level.

Level 1

Level 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 04.110 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 04.110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info