Bedienungsanleitung DeLonghi ESAM 4000 (Seite 4 von 7) (Alle Sprachen)

111219

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

ELECTRICAL REQUIREMENTS

Before using this appliance ensure that the voltage indicated on the product corresponds

with the main voltage in your home, if you are in any doubt about your supply contact your

local electricity company.

The ﬂexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13

amp capacity.

Should this plug not ﬁt the socket outlets in your home, it should be cut off and replaced with

a suitable plug, following the procedure outlined below.

Note: Such a plug cannot be used for any other appliance and should therefore be properly

disposed of and not left where children might ﬁnd it and plug it into a supply socket - with

the obvious consequent danger.

N.B. We recommend the use of good quality plugs and wall sockets that can be switched off

when the machine is not in use.

IMPORTANT: the wires in the mains lead ﬁtted to this appliance are coloured in accordance

with the following code:

GREEN AND YELLOW EARTH

BLUE NEUTRAL

BROWN LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

- The wire which is coloured green and yellow must be connected to the terminal in the

plug which is marked with the letter E or by the earth symbol or coloured green or

green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with

the letter N or coloured black.

- The wire which is coloured brown must be connected to the terminal which is marked

with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal.

Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has

only two pin socket outlets, or if you are in doubt, consult a qualiﬁed electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried

out by a qualiﬁed electrician and should only be replaced with a ﬂexible cord of the same

size.

After replacement of a fuse in the plug, the fuse cover must be reﬁtted. If the fuse cover

is lost, the plug must not be used until a replacement cover is obtained. The colour of the

correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or

elsewhere on the plug. Always state this colour when ordering a replacement fuse cover.

Only 13amp replacement fuses which are asta approved to B.S. 1362 should be ﬁtted.

This appliance conforms to the Norms EN 55014 regarding the suppression of radio inter-

ference.

Warning - this appliance must be earthed

Green and Yellow to Earth

13 amp

Fuse

Brown to

live

Cord Clamp

Blue to

neutral

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 4000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info