Bedienungsanleitung DeLonghi ESAM 5400 (Seite 19 von 22) (Englisch)

111281

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

hamic or acetic based descalers. Their use in-

validates the guarantee. Failure to descale the

appliance as described above also invalidates the

guarantee.

1. Turn the machine on.

2. Press the P button to enter the menu.

3. Turn the selector knob until the light

ﬂashes. Press : the and lights

alternates.

4. Completely empty the water tank (A7); em-

pty the drip tray (A11) and the coffee groun-

ds container, then reinsert them.

Pour the descaler diluted with water (respec-

ting the proportions indicated on the desca-

ler pack) into the water tank and reinsert it.

Place an empty container with a minimum

capacity of 1.5 litres under the hot water

spout.

Important! Danger of burns!

Hot water containing acid ﬂows from the cap-

puccino maker. Avoid contact with splashes of

water.

5. Press the button: the descaling pro-

gramme starts and the descaler liquid comes

out of the cappuccino maker.

The descale programme automatically per-

forms a series of rinses and pauses to remo-

ve limescale deposits from inside the machi-

ne.

After about 30 minutes, the water tank is empty.

The OK and lights comes on and the

and lights come on.

6. The appliance is now ready for rinsing throu-

gh with clean water. Remove the water tank,

empty, rinse under running water, ﬁll with

clean water and replace.

7. Empty the container used to collect the de-

scaler solution and replace it empty under

the cappuccino maker.

8. Press the button to start rinsing. Hot

water comes out of the spout and and

lghts come on.

9. When the water tank is completely empty,

the and OK lights come on.

10. Press the button: the appliance

switches automatically off.

Before switching on the appliance, by pressing

the button, empty the drip tray.

SETTING WATER HARDNESS

The light comes on after a period of time

established according to water hardness.

The machine is set by default for a hardness va-

lue of 4 (very hard water).

The machine can also be programmed according

to the hardness of the mains water in the various

regions so that the machine needs to be descaled

less often.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indi-

cator paper attached to this manual from its

pack.

2. Immerse the paper completely in a glass of

water for one second.

3. Remove the paper from the water and shake

lightly.

After about a minute, 1, 2, 3, or 4 red squares

form, depending on the hardness of the wa-

ter. Each square corresponds to one level.

Level 1

Level 2

Level 3

Level 4

Set water hardness

1. Press the P button to enter the menu.

2. Turn the selector knob until the light is

selected.

3. Conﬁrm the selection by pressing the

button.

4. Turn the selection knob and set the level

shown by the indicator paper (see previous

paragraph).

Level 1

Level 2

Level 3

Level 4

5. Press the button to conﬁrm the set-

ting.

6. Press the button to exit the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 5400 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 5400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info