Bedienungsanleitung DeLonghi ESAM 5500 (Seite 15 von 26) (Englisch)

99881

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

MAKING MILK-BASED

DRINKS

Filling and attaching the milk

container

1. Turn the lid of the milk container clockwise

until it becomes noticeably difficult to turn,

then remove the lid.

2. Fill the milk container with a sufficient quanti-

ty of milk, not exceeding the MAX level

marked on the handle (fig. 15).

NB!

You should ideally use skimmed or

2% milk at refrigerator temperature (about 41°F).

3. Make sure the milk intake tube (B4) is cor-

rectly inserted in the bottom of the milk con-

tainer lid (fig. 16).

4. Replace the milk container lid and turn coun-

terclockwise as far as it will go.

5. Remove the hot water spout from the nozzle

(fig. 17).

6. Attach the container to the nozzle, pushing as

far as it will go (fig. 18).

7. Place a sufficiently large cup under the coffee

spouts (A14) and the frothed milk spout (fig.

19). If necessary, move the frothed milk spout

slightly outwards (B5 - fig. 19).

Making cappuccino

1. Fill the milk container (B) with milk and attach

it as described in the section "Filling and

attaching the milk container".

2. Position the milk frother slide (B1) between

the words CAPPUCCINO and CAFFELATTE

printed on the milk container lid cover. The

quantity of froth can be adjusted by moving

the slide towards the word CAFFELATTE for a

denser froth. Moving it towards the word

CAPPUCCINO obtains a less dense froth.

3. Press the cappuccino button (fig. 22). The

message "Cappuccino" is displayed. (After a

few seconds, frothed milk runs out of the milk

spout into the cup below. Run off of milk

stops automatically and run off of coffee

begins.)

N.B.!

If you want to stop preparation, press

the CAPPUCCINO button twice. Pressing it once

stops frothed milk run-off, pressing it twice stops

coffee run-off.

Making frothed milk

1. Fill the container (B) with milk and attach it as

described in the section "Filling and attaching

the milk container".

2. Set the frothed milk regulator (B1) to the

quantity of froth required.

3. Press the CAPPUCCINO button (fig. 22) twice.

The message "Milk Frothing" is displayed.

NB!

If you want to stop preparation of

frothed milk, press the CAPPUCCINO button once.

Making caffelatte

1. Fill the container (B) with milk and attach it as

described in the section "Filling and attaching

the milk container".

2. Set the frothed milk slide (B1) to CAFFELAT-

TE.

3. Press the CAPPUCCINO button (fig. 22). The

message "Cappuccino" is displayed.

NB!

If you want to stop preparation of caf-

felatte, press the CAPPUCCINO button twice.

Making hot milk

1. Fill the container (B) with milk and attach it as

described in the section "Filling and attaching

the milk container".

2. Set the frothed milk slide(B1) to CAFFELATTE

3. Press the CAPPUCCINO button (fig. 22) twice.

The message "Milk Frothing" is displayed.

NB!

If you want to stop preparation of hot

milk , press the CAPPUCCINO button once.

"Less dense"

froth

NO froth

"Denser" froth

regulator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 5500 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info