Bedienungsanleitung DeLonghi EV250 (Seite 4 von 5) (Englisch)

770087

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

• Never pour water directly over the appliance (g. 16).

• Never use petrol, alcohol or solvents.

• Never spray insecticides or similar substances: the plastic

may be deformed.

• Clean the surfaces of the appliance using a soft cloth, never

use abrasive sponges as these may scratch the surface.

5.1 Cleaning the dust lter and honeycomb

cooling pad

Clean the dust lter regularly. The frequency of cleaning will de-

pend on the frequency of use: if used daily, it is recommended to

clean the lter every week.

• Extract the dust lter and cooling pad (g. 17);

• Remove any dust from the lters using a vacuum cleaner

(g. 18);

• Wash the cooling pad thoroughly with water; then leave it

to completely dry and re-insert the lters in their housing

(g. 19).

Note:

For the continued performance of the appliance, it is recom-

mended to replace the honeycomb cooling pad (A11) every 3

years.

5.2 Cleaning the water tank

• Extract the water tank (g. 4);

• Clean it thoroughly with a sanitising detergent, available

in stores (g. 20).

5.3 Replacing the remote control battery

• Extract the battery support on the back of the remote con-

trol (g. 21);

• Insert a battery type 3V CR2025 into the support, making

sure the poles are correctly matched (+ and -), then re-in-

sert the support (g. 22).

The remote control is ready for use.

Note:

If the remote control is disposed of or replaced, the battery must

be removed and disposed of in accordance with laws in force,

insofar as batteries are harmful to the environment.

Do not throw the battery into an open ame as it may explode or

release hazardous liquids.

6. TROUBLESHOOTING

Below is a list of possible malfunctions.

If the problem cannot be resolved using the proposed solution, contact the Service Centre.

PROBLEM POSSIBLE CAUSE SOLUTION

The appliance doesn't turn on The power cord is not connected Make sure the power cord is connected and that

there is power

The appliance is not on Turn on the appliance by pressing the key

(B1 on the control panel or D1 on the remote

control)

The appliance turns o Automatic shutdown has been activated Turn on the appliance and make sure the automat-

ic shutdown symbol is o

Excessive humidity in the room When the Cooling/humidication func-

tion is used, the appliance produces

humidity as a result of the evaporative

cooling eect. This is normal.

The appliance cools most eciently in dry cli-

mates. If the humidity level is high (60% and

above) it is best not to use the cooling/humidi-

cation function

Make sure the windows/doors are open and that

there is a sucient ow of air in the room, so that

the air can best circulate. It is nonetheless possible

to use the appliance in fan mode

The symbol ashes on the

display (C2) and the appliance is

not cooling very well

There is no water in the tank Fill the tank with cold water as indicated in par. 3.4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi EV250 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi EV250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info