The flexible mains lead is supplied con-
nected to a B.S. 1363 fused plug having a
fuse of 13 amp capacity.
Should this plug not fit the socket outlets in
your home, it should be cut off and
replaced with a suitable plug, following the
procedure outlined below.
Note: Such a plug cannot be used for any
other appliance and should therefore be prop-
erly disposed of and not left where children
might find it and plug it into a supply socket -
with the obvious consequent danger.
N.B. We recommend the use of good quali-
ty plugs and wall sockets that can be
switched off when the machine is not in use.
IMPORTANT: the wires in the mains lead
fitted to this appliance are coloured in
accordance with the following code:
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured green and yel-
low must be connected to the terminal in
the plug which is marked with the letter E
or by the earth symbol or coloured green
or green and yellow.
The wire which is coloured blue must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
When wiring the plug, ensure that all
strands of wire are securely retained in
each terminal. Do not forget to tighten the
mains lead clamp on the plug. If your elec-
tricity supply point has only two pin socket
outlets, or if you are in doubt, consult a
qualified electrician.
Should the mains lead ever require
replacement, it is essential that this opera-
tion be carried out by a qualified electrician
and should only be replaced with a flexible
cord of the same size.
After replacement of a fuse in the plug, the fuse
cover must be refitted. If the fuse cover is lost,
the plug must not be used until a replacement
cover is obtained. The colour of the correct
replacement fuse cover is that of the coloured
insert in the base of the fuse recess or else-
where on the plug. Always state this colour
when ordering a replacement fuse cover.
Only 13amp replacement fuses which are
ASTA approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN
55014 regarding the suppression of radio
interference.
Before using this appliance ensure that the voltage indicated on the product corre-
sponds with the main voltage in your home, if you are in any doubt about your sup-
ply contact your local electricity company.
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
WARNING - THIS APPLIANCE MUST BE EARTHED
ELECTRICAL REQUIREMENTS
Green and Yellow to
Earth
Blue to Neu-
tral
13 amp
Fuse
Brown to
Live
Cord Clamp
