3
ELECTRICAL CONNECTION (U.K. ONLY)
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket,
the plug should be cut off from the mains lead, and on appropriate plug fitted, as below. WARNING:
Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket
elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a
fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must
be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing
the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of
the plug.
B) If your appliance is not fitted with a plug, please follow the instructins provided below:
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue Neutral
Brown Live
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
If you have a 3-pins plug, do not connect any wire to the “earth” terminal.
P max
P med
P min
OFF
Fig. 5
Abb. 5
åéë. 5
Kuva. 5
ËÒ.5
Rys. 5
5. ábra
Obr. 5
Fig. 6
Abb. 6
åéë. 6
Kuva. 6
ËÒ. 6
Rys. 6
6. ábra
Obr. 6
Fig. 7
Abb. 7
åéë. 7
Kuva. 7
ËÒ. 7
Rys. 7
7. ábra
Obr. 7
HCA OK 29-05-2001 12:12 Pagina 3
