Bedienungsanleitung DeLonghi KBD2001 (Seite 3 von 3) (Englisch)

770089

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

- Place kettle on power base.

- Press the ON/OFF switch down (g. 5) to switch the kettle on.

- The pilot light will switch on.

- The kettle will automatically switch o once the water is

boiled (the ON/OFF switch will click upwards and the lights

will switch o ).

- To turn the kettle o before the water boils, you may move the

ON/OFF switch up to the OFF position, or simply lift the kettle

from its base it will switch o and the switch will return to the

OFF position automatically.

Pouring

- Remove the kettle from the power base and carefully pour out

the water. Do not tilt the kettle suddenly or pour water out at

too sharp an angle.

- When you lift the kettle from the base, you may see moisture

on the top surface of the base. Condensation on the base is

perfectly normal, and should not be a cause for alarm.

Please note: Empty the kettle after each use. Rinse the

kettle with fresh water if you have not used for more than two days.

To reduce energy consumption and waste of water, use only the

amount of water you need.

SAFETY DEVICES

1) Automatic ON/OFF switch:

Your kettle is tted with an ON/OFF switch which automatically

switches o once the water has boiled. If the kettle has just

boiled, wait a minute or so before re-boiling the kettle. Do not

attempt to hold the ON/OFF switch in the on position or adjust

the switch mechanism.

2) Safety cut-out:

If the kettle is switched ON with too little or no water, it is

protected against damage by a safety cut-out which will

switch o the power. If this cut-out operates, disconnect the

kettle from the mains supply and leave to cool down before

relling with cold water (otherwise the element could be

damaged).

3) If kettle is lifted from base while operating (ON), it will

automatically switch o.

MAINTENANCE

Cleaning the kettle

- Allow the kettle to cool down fully and disconnect the

appliance from the mains before cleaning.

- Do not immerse the kettle or base in water.

- To maintain the precious nish of the appliance, we

recommend cleaning the outside of the appliance with a

damp cloth and water only.

- DO NOT use metal polish, ammable liquids or harsh scouring

agents.

- Ensure that all connectors and sockets are kept dry.

Scale

When the water is heated, the minerals in the water solidify, making

the water appear cloudy. As soon as you notice a lm forming on

the water, or, when cleaning the lter, if you notice a lm on the

walls or the element, descale the kettle and its lter.

Scale lter

Your kettle is tted with a scale lter to prevent loose particles of

scale being poured into your beverage. This lter is both removable

and washable. You should remove and clean the water lter when

you notice any deposits being left on the lter or if the pouring

eciency is impaired.

Removing the scale lter

- Allow the kettle to cool down fully and disconnect the

appliance from the mains electrical supply. Make sure that

your hands are clean and free from soap, cream or anything

which might taint the water.

- Empty the kettle and remove the lter as shown in g. 1.

Rinse under a tap whilst brushing with a soft brush (g. 2) and

replace the lter (g. 3). Filter may pose suocation risk,

do not let it unattended after cleaning.

To clean the kettle and the scale lter

It is vital to clean and descale regularly in order to maintain good

working order. Excessive scale build-up may aect the performance

of the product and shall be avoided.

- Use descaler for kettles (tip: use citric-acid based descaling

solutions). When limescale starts forming on the heating

element, buy a suitable descaler for kettles and descale

according to the instructions given on the descaler pack.

- After descaling, boil repeatedly with fresh water and rinse

thoroughly to completely eliminate all residues of descaler

which could damage the appliance. Repeat the boil and rinse

steps for at least three times.

- If the lter requires descaling, remove and immerse in the

same descaling solution.

- Make sure electric parts are completely dry before using the

kettle.

TECHNICAL CHARACTERISTICS

Supply voltage See rating plate

Absorbed power “

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi KBD2001 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi KBD2001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info