25
Using the remote control unit
MODELS WITH REMOTE CONTROL
• Point the remote control at the receiver on
the air conditioner. The remote control
must be no more than 5 metres away from
the appliance (without obstacles
between the remote control and the
receiver).
• The remote control must be handled with
extreme care and respect. Do not drop it
or expose it to direct sunlight or sources of
heat.
DESCRIPTION OF THE REMOTE CONTROL
17) "ON/OFF" button
18) "MODE" button
19) Temperature decrease/increase and
programme mode button
20) "TIMER" button
21) Fan speed button (MAX/MED/MIN)
22) °F/°C switching button
Replacing the batteries
• Remove the cover on the back of the
remote control;
• Insert two new LR03 “AAA” 1.5V batteries,
making sure they are in the correct posi-
tion (see the instructions inside the battery
compartment);
• Replace the cover.
If the remote control unit is replaced or
discarded, the batteries must be removed
and disposed of in accordance with current
legislation as they are harmful to the envi-
ronment.
Do not mix alkaline, standard (zinc-carbon)
and rechargeable (nickel-cadmium) batte-
ries. Do not throw the batteries in the fire as
they could explode or leak dangerous
liquids.
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the ON/OFF button of the remote control (17) (when turned on, the air conditioner starts
operating in the same mode as when last turned off).
Press the MODE button (18) button to select the required mode:
AIR CONDITIONING (COOLING)
DEHUMIDIFYING
FAN ONLY
The light corresponding to the selected mode lights up on the control panel.
For air conditioning/dehumidifying/fan only settings and programming the timer, see the para-
graphs on pages 22-23.
MAX 5 metres
17
19
20
22
21
18
EN