28
Using the remote control unit
TURNING THE APPLIANCE ON
Plug into the mains socket.
Press the ON/OFF button 17 (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
Press the MODE 18 button to select the required mode
AIR-CONDITIONING (COOL)
DEHUMIDIFYING (DRY)
FAN ONLY (FAN)
An arrow on the display indicates the selected mode.
AIR-CONDITIONING MODE (COOL)
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air-conditioning mode, use the buttons to select the desired temperature.
The display shows the set temperature.
To change the fan speed, use the FAN button 16 on the remote control, choosing from the avai-
lable speeds:
AUTO: the appliance automatically selects the most suitable fan speed in relation to the tem-
perature set on the digital display.
HIGH: the air conditioner operates at maximum to reach the required temperature as rapidly as
possible
MED: reduces noise levels but still maintains a good level of comfort
LOW: for silent operation
Two arrows on the display indicate respectively COOL and the fan speed.
The most suitable temperature for the room during the summer varies from 24 to 27°C. You are
recommended, however, not to set a temperature much below the outdoor temperature.
DEHUMIDIFYING MODE (DRY)
Ideal to reduce room humidity while avoiding temperature variations (spring and autumn, damp
rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate DRY and AUTO respectively.
FAN MODE ONLY (FAN)
In fan mode, fan speed can be set by pressing the FAN button 16.
The fan speed changes between the speeds available (LOW/MED/HIGH).
Two arrows on the display indicate FAN mode and the speed set.
In this mode, AUTO speed cannot be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by
optimising operating periods.
How to programme delayed shutdown
•With the air-conditioning unit on, press the TIMER button 19. The time is displayed and the "h"
symbol flashes, with a flashing arrow indicating TIMER OFF.
• Set the time when you want the appliance to go off using the buttons (from 30 minutes to
24 hours). During the first ten hours, you can select half hour intervals. For times greater than ten
hours, one hour intervals can be selected.
•Press the TIMER button again to confirm the selection. The appliance emits a beep and the
light (H) flashes on the control panel, confirming successful activation of the timer. A count-
down of the time left is displayed on the remote control display and the light (H) flashes on the
air conditioner display.
• At the end of the set time the appliance switches off automatically.
