Bedienungsanleitung DeLonghi PAC EL110 (Seite 3 von 8) (Englisch)

800390

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

TURNING THE APPLIANCE ON/OFF

Before plugging the appliance check

the cap on back of the unit is correct-

ly inserted on drainage hose (A10).

Insert the plug in the socket.

Two dashes appear on the display

indicating that the appliance is in

stand-by.

Touch the

C1C2

C11

C13

C19

C20

C16

C14

C12

C10

C15

C17

C18

(C1) key to turn on the

appliance.

When the appliance comes on, the

last function set before it was shut

o is activated.

Please note: After few seconds

of the control panel inactivity, its

brightness will be automatically re-

duced and in the next few minutes

it will be further reduced.

To turn the appliance o, touch the

C1C2

C11

C13

C19

C20

C16

C14

C12

C10

C15

C17

C18

(C1) key again.

Please note: Never turn o the air conditioner by simply pull-

ing the plug. Touch the

C1C2

C11

C13

C19

C20

C16

C14

C12

C10

C15

C17

C18

(C1) key in order to put your air

conditioner in stand-by and wait a few minutes before pulling

the plug. In this way, the appliance can perform the operating

status checks.

MODES SELECTION

To select the desired operating

mode, touch repeatedly the MODE

key (C2) until the desired function

is selected.

Wi-Fi FUNCTION From the control panel)

To select or deselect the Wi- func-

tion, keep touching the MODE key

for 3 seconds.

Once the Wi-Fi icon is displayed it means that the following

Wi-Fi features are available:

SYMBOL WI-FI FIXED

it means that the Wi-Fi features are active AND the

“Home WLAN” has been found.

SLOW FLASHING

it means that the appliance is searching for the

“Home WLAN” .*

FAST FLASHING

it means that the “Home WLAN” has not been

found or has not been set yet.

“APP CONTROL “ ICON

When the APP CONTROL icon appears it means that

the last command has been received via app.

If the memorized “Home WLAN” settings needs to be changed,

proceed as follows:

a) keep touching for about 20 seconds the MODE button C2 on

the control panel until a prolonged beep is emitted;

b) the icon and blink simoultaneously.

c) use the app to enter the new WLAN settings into the unit.

* Note: In standby, the search for “Home WLAN” stops after ap-

proximately 1 hour. It will resume once the appliance is turned

on again.

AIR CONDITIONING MODE

This is ideal for hot and humid weath-

er when the room needs to be both

cooled and dehumidied.

To correctly set this mode:

• Touch repeatedly the MODE key

(C2) until the air conditioning

symbol appears. The display will

show the desired temperature and

the AUTO fan speed.

. • To change the temperature to be

reached, touch the (C4) or (C3)

key.

Please note: The most suitable temperatures, during the sum-

mer range from 24 to 27°C. However, setting the temperature

signicantly lower than the outdoor temperature is not recom-

mended.

In conditioning mode, the air ow can be selected only from the

remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi PAC EL110 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi PAC EL110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info