11
If the unit is not working properly, this may be due to small problems that you can easily resolve yourself.
Follow these instructions carefully before contacting your local Authorised Technical Service Centre.
PROBLEM
REMEDY
The unit does not
work
• it is not plugged in
• there is no electricity
• the selector is in the “ ●●” (Off) position
11
• plug in
• wait
• move the selector to the desired
position
CAUSE
The unit works for
only a short time
• there is a kink in the exsaust hose
• the exsaust hose is blocked
• there are too many curves in the outlet tube
• the fan is blocked
• the tank is full activating the safety float
• the tank is incorrectly positioned
• position the exaust hose correctly
• check there are no blockages
preventing the discharge of air
to the outside
• rearrange the hose correctly
(see set up instructions)
• contact the Service Centre
• empty the tank
• reposition the tank correctly
The unit works but
does not cool the
room
• three minutes have not passed since it was
turned on
• windows are open
• a heat source is operating in the room (burner,
light, etc.) or there are a lot of people
• the air outlet hose has come detached from
the coupling
• thermostat adjusted too high
• air filters clogged
• the output of the unit is insufficient for the con-
ditions or size of the room
• wait three minutes (safety devi-
ce) before the appliance start
cooling.
• close the windows
• eliminate heat sources
• fit the hose in the coupling
• lower the thermostat
• clean/replace filters
The tank full light is
on
Troubleshooting
RECOMMENDED OPERATING
CONDITIONS
Room temperature 21 ÷ 32°C
TECHNICAL SPECIFICATION
Power supply see rating plate
Max. absorbed power
in air conditioning “
Refrigerating capacity* “
Number of fan speeds 2
Max. air flow . 360 m
3
/h
Dimensions:
• width 452 mm
• height 800 mm
• depth 415 mm
• weight 33,5 kg
* Standard conditions: ASHRAE 128
This appliance contains substances which, if released into the atmosphere, would damage the
ozone layer. Care should therefore be taken not to perforate the refrigerant circuit. At the end of
its working life, please delivery the air conditioning unit to a special collection center.
