27
ENGLISH
Fan mode
FUNZIONE VENTILAZIONE
Adjust fan speed by pressing the FAN button (P).
The fan speed selected will be displayed (HIGH, MED, LOW).
In this mode, AUTO cannot be selected.
HEATING MODE (CERTAIN MODELS ONLY)
To set operation of the appliance correctly, press the "+" (G) or "-" (I)
buttons until the desired temperature is displayed.
In heating mode, the fan speed is selected automatically by the
appliance.
SETTING THE TIMER
The timer can be used to delay appliance start up or shut down.
This avoids wasting electricity by optimising operating periods
How to programme delayed start up
• Plug the appliance into a mains socket and press the ON/STAND-BY button (A), then select the
required operating mode and other settings (temperature, fan speed, etc).
•Press the ON/STAND-BY button (A) again. The appliance switches to stand-by mode.
•Press the TIMER button (H): the last timer setting or the preset value 6.0 h flashes on the display.
66 .. 00
h.
•Use the + (G) or - (I) buttons to set the number of hours delay before the appliance comes on.
During the first ten hours, you can select half hour intervals.
For times greater than ten hours, one hour intervals can be selected.
If the "+" (G) or "-" (I) buttons are pressed for more than 2 seconds, the time runs rapidly up to
a maximum of 24 hours.
Press the timer button again within a few seconds to confirm the setting.
If the setting is not confirmed within a few seconds, the display resets to stand-by.
With the timer activated, the countdown before the programmed start up time is displayed.
To cancel the timer programme, press the timer button (H).
How to programme delayed shutdown
• Delayed shutdown can be set with the appliance in any operating mode - air conditio-
ning/dehumidifying/fan/heating (certain models only).
•Press the Timer button (H) the last timer setting or the preset value
66 .. 00
h. flashes on the display.
•Use the + (G) or - (I) button to set the number of hours delay before the appliance goes off
During the first ten hours, you can select half hour intervals.
For times greater than ten hours, one hour intervals can be selected.
If the "+" (G) or "-" (I) buttons are pressed for more than 2 seconds, the time runs rapidly up to
a maximum of 24 hours.
Press the timer button again within a few seconds to confirm the setting.
At the set time, the air conditioner shuts down and remains in stand-by.
To cancel the timer programme, press the timer button (H).
