How to dehumidify
1) Plug the appliance into a mains socket. The ON light comes on indicating that the
appliance is plugged into the mains.
2) Make sure the “tank full/tank missing” light is off.
3) Turn the function selector to the "DEHUMIDIFYING" position or one of the two
"DEHUMIDIFYING" positions (1 = min., 2 = max.) depending on model.
The dehumidifying standby light comes on during the first three minutes (safety device),
then the appliance starts dehumidifying.
4) The humidistat dial enables the humidity level to be regulated as required.
To adjust the humidity level quickly and easily, proceed as follows:
Turn the humidistat dial to the "continuous" position. When the humidity has reached the
required level, slowly turn the humidistat dial anticlockwise until the dehumidifying light goes
out.
The dehumidifier will then keep the humidity in the room at the selected level automatically.
When the dial is on MIN, the dehumidifier removes only a small amount of humidity from the
room. On MAX, it removes a large amount of humidity.
Adjust the humidistat to one of the positions available. (MIN/MED/MAX)
Note: The dehumidified air given off by the appliance is usually 1-2°C hotter than room
temperature.
How to ventilate
Turn the function selector switch to pos. or in some models, to one of the two
VENTILATION positions : 1 = min. 2 = max.
The ventilation light comes on
TO TURN THE UNIT OFF COMPLETELY, SET THE FUNCTION SELECTOR TO THE “O” POSITION AND
UNPLUG FROM THE MAINS.
16
Selecting operating modes
