7
Additional safety features
1. Overheating protection: a safety device switches the fan heater off if it accidentally overheats
(e.g. air intake and outlet grilles obstructed, motor not turning or turning slowly). In this case
remove the plug from the power outlet and leave it unplugged for a few minutes, eliminate the
cause of overheating, then plug the fan heater back and turn on it again.
2. Tip over safety switch: a safety tip-over switch turns the fan heater off if it tips over or is positio-
ned in an improper way that could jeopardize safety.
Note: To avoid overheating the appliance, do not cover it.
TROUBLE-SHOOTING
In case “PF” is displayed and a warning sound is emitted, there is a fault on the temperature sensor.
If the problem persists contact the Service Center.
If the appliance shuts off unexpectedly:
- Check that the appliance is receiving power.
- Check that the appliance is in the vertical position and on a flat surface, as the safety tip-
over switch may have been tripped.
- Check the temperature set and the timer.
The appliance may be off because the set temperature has been reached or the time set on
the timer has elapsed.
