All cleaning tools and accessories are fitted
onto one or both extension tubes as required,
proceeding as follows:
• firmly grasp the piece onto which to fit the
accessory. Push the locking button with the
thumb of the same hand.
• with your other hand, insert the accessory
and slide it in carefully until the locking
button pops out (fig. 4).
To remove the accessory, reverse the
operation, taking care not to pinch the thumb
holding down the button.
SWITCHING THE APPLIANCE ON
Connect the plug to a mains outlet, switch the
on/off button (6) to the on position and switch
the steam generator on by means of its
switch (5). The switch indicators (3 and 4) will
come on.
When the steam-generator indicator (3) goes
out and the needle on the pressure gauge (2)
(where provided) is in the green area, the
machine is ready for use. This will take approx.
15 minutes.
While using, the indicator (3) will go on and off.
This is completely normal.
For steam output, press button (1) and then
keep trigger (2) depressed (fig. 5). When the
trigger (2) on the handgrip is released, steam
output will stop immediately.
CLEANING
Carpets and rugs
Tools: carpet/floor brush plus cloth accessory
fastened with the spring clips.
Steam output: medium setting
15
4
Suggestions:
˙ test for colour fastness and
fibre resistance in a hidden or
inconspicuous area before use
˙remove dust first with a carpet
sweeper or vacuum cleaner
5
1
2
