Bedienungsanleitung DeLonghi XTR 1600M (Seite 8 von 43) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

562711

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

V Telescopic tube

W Extension release button

X Hose

Y Suction port catch

Z Vacuum power regulator

Tools

Z1 Multipurpose brush

Z2 Multi-purpose nozzle

Z3 Crevice tool

Using for the rst time (page 40)

Before using the appliance, remove the elements protecting

the dust container B and connect the hose to the handgrip.

Using the appliance (page 41)

Adjust the length of the telescopic tube, attach the tool suit-

able for the cleaning to be done and turn the appliance on. You

can adjust the suction power with the regulator Z.

EPS - Electronic protection system

The EPS device is activated when the lters are clogged. The

lightonthecontrolpanelashes.

If you continue to use the appliance once the light has come

on, the vacuum power is reduced automatically. This is a safety

device to avoid damage to the motor.

To start cleaning again, turn the appliance o, empty the con-

tainer and proceed cleaning (cleaning, pag. 42).

Cleaning (pag. 42)

To keep the appliance vacuuming eciently, the lter of the

dust container, the HEPA lter and its protection should be

cleaned whenever the EPS is activated or at least once every

six months. Before reinserting the impeller sponge lter, make

sure it is dry.

Warning: If you need to immediately use the appliance,

brush and shake the lters, without carrying out the

washing.

Park system (pag. 41)

The appliance is provided with a hose tidy system on the bot-

tom to enable it to be put away safely and tidily

Warning: Do not open the device when the handle is in

park position (K).

If you have to interrupt cleaning for a brief period, the appli-

ance has a convenient hose “parking” system. Insert the bracket

on the brush joint into the housing on the bottom of the ap-

pliance.

Troubleshooting

The appliance does not come on.

It is not plugged into the mains socket. Plug into the mains socket.

The impeller turns slowly or not at all.

The rst time you use the appliance, it is nor-

mal for the impeller to rotate slowly.

Something is blocking the impeller. Extract and open the container. Remove the

elements blocking the movement and make

sure the internal rotating supports turn freely.

Filters are clogged. Clean the appliance (page 42) even if the eps

device has not interveened.

The lid of the appliance cannot be closed

The dust container is not inserted correctly. Extract and insert the container, aligning it

correctly in the appliance. When the container

is positioned correctly, you will hear a click

when the appliance is closed and the buttons

Q are released.

Check that the handgrip is not in parking po-

sition.

The vacuum power of the appliance drops

and the light Rashes

Filters are clogged or the hose is blocked. Empty the container and clean the appliance.

Make sure the hose is not blocked and if neces-

sary remove the obstructions.

Use - Cleaning - Park system

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi XTR 1600M Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info