Bedienungsanleitung Denon AVC-A1HD (Seite 41 von 120) (Englisch)

469386

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

Source Delete

Remove input sources that are not used from the display.

[Selectable items]

Delete

NOTE

• Input sources being used in the various zones cannot be deleted.

• Input sources set to “Delete” cannot be selected from GUI menu

“Source Select” or using the SOURCE SELECT knob on the main unit

or SOURCE SELECT button on the remote control unit.

f GUI

Make GUI related settings.

Screensaver

Make screensaver settings.

Use the screensaver to prevent burn-in on the monitor screen.

When set to “ON”, the screensaver is activated if there is no activity

for about 3 minutes.

[Selectable items]

OFF

Wall Paper

Change the GUI background.

[Selectable items]

Picture

Black

Gray

Blue

Format

Select the video output signal format to match the monitor.

[Selectable items]

PAL

NTSC

NOTE

When a format other than the video format of the connected monitor

is set, the picture will not be displayed properly. Use the procedure

described below to change the video format.

Master Volume

Master volume display during adjustment.

[Selectable items]

OFF

NET/USB / iPod

This sets the time the on-screen display is displayed when an operation

is performed.

[Selectable items]

Always

30s

10s

OFF

g Quick Select Name

Change “Quick Select” display name.

Up to 16 characters can be input.

[Input characters]

A ~ Z

a ~ z

0 ~ 9

! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

Text

Text information display.

[Selectable items]

OFF

Operating from the main unit

b The GUI menu is not displayed when performing this setting.

q Press and hold the AUDIO DELAY and RETURN buttons for at least 3

seconds.

“Video Format” appears on the display.

w Use the o p button to make the setting.

e Press the ENTER, MENU or RETURN button to complete the

setting.

h Trigger Out 1

Select the conditions to turn on the trigger out 1 with respect to

the zone, input source, surround mode, HDMI monitor, etc.

For details about the trigger out function, see page 22.

j Trigger Out 2

This sets the conditions to turn on the trigger out 2, in the same

way as “Trigger Out 1” above.

k Trigger Out 3

This sets the conditions to turn on the trigger out 3, in the same

way as “Trigger Out 1” above.

l Trigger Out 4

This sets the conditions to turn on the trigger out 4, in the same

way as “Trigger Out 1” above.

[Selectable items]

– – –

Setting with Respect to the Zone

When the power of the zone turned on/off, the trigger out turns on.

Setting with Respect to the Input Source

When the input source set to on is selected, the trigger out turns on.

Setup

Associated with the power supply of zones set to “ON”.

Associated with respect to the input source for zones set to “ON” at

“Setting with Respect to the Zone”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVC-A1HD Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVC-A1HD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info