Bedienungsanleitung Denon AVC-A1HDA (Seite 45 von 117) (Englisch)

616171

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

A6 Dimmer

Adjust display brightness of the receiver.

Operating from the main unit

Press the DIMMER button.

[Selectable items]

Bright

Dim

Dark

OFF

Bright Dim

DarkOFF

A7 Setup Lock

Protect settings from inadvertent change.

• When “Setup Lock” is set to “ON”, the settings listed below can

no longer be changed. Also, “SETUP LOCKED!” is displayed if you

attempt to operate related buttons.

⋅ GUI menu operations

⋅ RESTORER

⋅ Night Mode

⋅ Parameter

⋅ Room EQ

⋅ Channel Level

⋅ Audio Delay

• To cancel the setting, press the MENU button to re-display the “Setup

Lock” screen, then change the setting to “OFF”.

[Selectable items]

OFF

A8 Maintenance Mode

This sets the function for maintenance by a DENON serviceperson

or installer. (For professional use only.)

NOTE

Only use this function if so instructed by a DENON serviceperson or

installer.

This function allows a DENON serviceperson or installer to check the

AVP-A1HD’s status and make settings via the Internet.

A9 Firmware Update

Update the ﬁrmware of the receiver.

Check for Update

You can check for ﬁrmware updates. You can also check approximately

how long it will take to complete an update.

Start

Execute the update process.

When updating starts, the power indicator becomes red and the GUI

screen is shut down.

The amount of update time which has elapsed is displayed during the

update process.

When updating is complete the power indicator becomes green and

normal status is resumed.

If the display reads as shown below, check the settings and network

environment, then update again.

Display Description

Updating failed Updating failed.

Server is busy Server is busy. Wait a while then try again.

Connection fail Failure connecting to server.

Notes concerning use of “Firmware Update” and

“Add New Feature”

• In order to use these functions, you must have the correct system

requirements and settings for a broadband Internet connection. For

details, see pages 34 ~ 36.

• Do not turn off the power until updating or upgrating is completed.

• Normally there is no need to use this function, aside from the cases

described below.

⋅ Firmware Update : In the case of applying the latest ﬁrmware

updates (free)

⋅ Add New Feature : In the case of future upgrades to add new

functions to the receiver (payment required)

⋅ Information regarding the “Firmware Update” function and “Add

New Feature” will be announced on the DENON web site each

time related plans are deﬁned.

• Even with a broadband connection to the Internet, approximately

1 hour is required for the updating/upgrading procedure to be

completed.

Once updating/upgrading starts, normal operations on the

AVP-A1HD cannot be performed until updating/upgrading is

completed.

Furthermore, updating/upgrading the ﬁrmware may reset the

backup data for the parameters, etc., set for the AVP-A1HD.

• When updating/upgrading the ﬁrmware, we recommend using

wired connections (Ethernet cable).

Upgrade

Execute the upgrade process.

When upgrading starts, the power indicator becomes red and the GUI

screen is shut down.

The amount of upgrade time which has elapsed is displayed during the

upgrade process.

When upgrading is complete the power indicator becomes green and

normal status is resumed.

If the upgrade is not successful, an error message identical to those

in “Firmware Update” will appear on the display.

S0 Add New Feature

Display the new functions which can be purchased for downloading

to the AVP-A1HD and upgrade.

When you purchase a new function and register your user information,

“Registerd” is displayed on this menu and you can proceed with the

upgrade.

Upon completion of the upgrade, you can start using the new

function.

Setup

If POA-A1HD is connected using the control link, POA-A1HD meter

operation is turned OFF when the AVP-A1HD display is turned “OFF”.

If POA-A1HD is connected using the control link, POA-A1HD is updated

simultaneously with update of AVP-A1HD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVC-A1HDA Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info