Bedienungsanleitung Denon AVR-1311 (Seite 13 von 64) (Englisch)

498671

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Basic version Advanced version InformationSimple version

Set up speakers

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁ rm the setting Return to previous menu

Use ui to select a speaker, and use o p to select a

detailed setting.

Items to be set are shown below.

Front

Set the front speaker size.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity

for low frequencies.

• When “SW” is set to “No”, “Front” is automatically set to “Large”.

• When “Front” is set to “Small”, “Center”, “Surround“ and

“S.B(Pre)” can not be set to “Large”.

Center

Set the presence and size of the center speaker.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity

for low frequencies.

• None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Surround

Set the presence and size of the surround speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity

for low frequencies.

• None : Select when the surround speakers are not connected.

• When “Surround” is set to “Large”, “S.B(Pre)” can be set to

“Large”.

• When “Surround” is set to “None”, “S.B(Pre)” can automatically

set to “None”.

Press MENU.

The menu is displayed on the display of this unit.

Speaker Setup

Use ui to select “Speaker Setup”, and then press

ENTER.

Speaker Config.

Use ui to select “Speaker Conﬁ g.”, and then press

ENTER.

Front :•Large–

NOTE

Do not use the outward shape of the speaker to determine selection

of a “Large” or “Small” speaker. Instead, use the frequencies set in

“Crossover Frequency” (vpage9) as the standard for determining

bass reproduction capability.

S.B(Pre)

(Surround Back)

Set the presence, size and number of surround

back speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity

for low frequencies.

• None : Select when the surround back speakers are not connected.

Even when the “S.B(Pre)“ setting is other than “None”, sound

may not be emitted from the surround back speaker, depending

on the playback source. In this case, make “Surround Parameter”

– “SB CH OUT” (vpage37) setting other than “OFF”.

SW (Subwoofer)

Set the presence of a subwoofer.

• Yes : Use a subwoofer.

• No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “SW” is automatically set to

“Yes”.

Press ENTER to enter the setting.

Speaker Config.

Speaker Conﬁ g.

Default settings are underlined.

1.AVR1311E2_ENG_3rd_100617.indd Sec:71.AVR1311E2_ENG_3rd_100617.indd Sec:7 2010/06/17 18:24:102010/06/17 18:24:10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1311 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info