Bedienungsanleitung Denon AVR-1311 (Seite 43 von 64) (Englisch)

498671

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Setting items Setting details

Mode

Set the play modes for the

different surround modes.

n In the PLgx or PLg mode

Cinema : Surround sound mode optimized for movie sources.

Music : Surround sound mode optimized for music sources.

Game : Surround sound mode optimized for games.

Pro Logic : Dolby Pro Logic playback mode (PLg mode only).

n In the DTS NEO:6 mode

Cinema : Surround sound mode optimized for movie sources.

Music : Surround sound mode optimized for music sources.

The “Music” mode is also effective for movie sources including a lot

of stereo music.

LFE

Adjust the low-frequency

effects level (LFE).

–10dB – 0dB

For proper playback of the different sources, we recommend setting

to the values below.

• Dolby Digital sources : “0dB”

• DTS movie sources : “0dB”

• DTS music sources : “–10dB”

Center Image

Assign center channel

signal to front left and right

channels for wider sound.

0.0 – 1.0 (0.3)

Panorama

Assign front L/R signal also

to surround channels for

wider sound.

ON : Set.

OFF : Do not set.

Dimension

Shift sound image center

to front or rear to adjust

playback balance.

0 – 6 (3)

Center Width

Assign center channel

signal to front left and right

channels for wider sound.

0 – 7 (3)

AFDM

(Auto ﬂ ag detect mode)

Detect the source’s

surround back channel

signal and set the

optimum surround mode

automatically.

ON : Set.

OFF : Do not set.

[Example] Playing Dolby Digital software (with EX ﬂ ag)

• When “AFDM” is set to “ON”, the surround mode is automatically set

to the DOLBY D + PLgx C mode.

• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and

“Surround Parameter” – “SB CH OUT” to “MTRX ON”.

Some Dolby Digital EX sources do not include EX ﬂ ags. If the playback

mode does not switch automatically even when “AFDM” is set to

“ON”, set “Surround Parameter” – “SB CH OUT” to “MTRX ON” or

“PLgx CINEMA”.

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁ rm the setting Return to previous menu

Adjusting the sound ﬁ eld effects

Setting items Setting details

D.Comp

Compress dynamic range

(difference between loud

and soft sounds).

Low / Mid / High : These set the compression level.

OFF : Turn dynamic range compression off.

DRC

Compress dynamic range

(difference between loud

and soft sounds).

Auto : Automatic dynamic range compression on/off control according to

the source. This can be set in the Dolby TrueHD mode.

Low / Mid / High : These set the compression level.

OFF : Dynamic range compression is always off.

SB CH OUT

Sets the method of

generating of the surround

back channel.

This can also be set by

pressing STANDARD on

the main unit.

NOTE

If the setting in “Speaker

Conﬁ g.” – “S.B(Pre)”

(vpage7) is “None”, “SB

CH OUT” is not displayed.

n For 2-channel sources

ON : The surround back channel is used.

OFF : No signal is played from the surround back channels.

n For Multi-channel sources

Set the decoding method for the surround back channel.

DSCRT ON : Play the surround back signals included in the 7.1-channel

source.

MTRX ON : Generate and play the surround back signals from the

surround channel signals.

ES MTRX

: Generate and play the surround back signals from the

surround channel signals of the DTS source.

ES DSCRT

: Play the surround back signals included in the

6.1-channel DTS source.

PLgx CINEMA

: Generate and play the surround back signals by

decoding the signals in the Dolby Pro Logic gx Cinema mode.

PLgx MUSIC : Generate and play the surround back signals by

decoding the signals in the Dolby Pro Logic gx Music mode.

OFF : Do not play the surround back channel.

z1 This can be selected when playing DTS sources.

z2 This can be selected when playing DTS sources including a signal to

identify discrete 6.1-channel signals.

z3 This can be selected when “Speaker Conﬁ g.” – “S.B(Pre)” (vpage7)

is set to other than “None”.

If the source being played contains a surround back signal, the decoder

type is automatically selected by the AFDM function. Set “AFDM” to

“OFF” to switch to your preferred decoder.

Subwoofer

Turn subwoofer output on

and off.

ON : The subwoofer is used.

OFF : The subwoofer is not used.

NOTE

This can be set when the surround mode is “DIRECT” (vpage46, 47), and

the “Mode” (vpage8) is “LFE+Main”.

Default

The “Surround Parameter”

settings are returned to the

default settings.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

1.AVR1311E2_ENG_3rd_100617.indd Sec:371.AVR1311E2_ENG_3rd_100617.indd Sec:37 2010/06/17 18:24:212010/06/17 18:24:21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1311 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info