Bedienungsanleitung Denon AVR-1604 (Seite 8 von 73) (Deutsch, Englisch)

498684

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

ENGLISH

Connecting the antenna terminals

DIRECTION OF

BROADCASTING

STATION

75 Ω/ohms

COAXIAL

CABLE

ANTENNA

FM INDOOR

ANTENNA

(An Accessory)

AM LOOP

ANTENNA

(An Accessory)

AM OUTDOOR

ANTENNA

GROUND

AM loop antenna assembly

Connect to the AM

antenna terminals.

Remove the vinyl tie

and take out the

connection line.

Bend in the reverse

direction.

a. With the

antenna on top

any stable

surface.

b. With the antenna

attached to a

wall.

Mount

Installation hole Mount on wall, etc.

Connection of AM antennas

1. Push the lever. 2. Insert the

conductor.

3. Return the

lever.

NOTES:

• Do not connect two FM antennas simultaneously.

• Even if an external AM antenna is used, do not

disconnect the AM loop antenna.

• Make sure AM loop antenna lead terminals do

not touch metal parts of the panel.

Speaker Impedance

• When speaker systems A and B are use separately,

speakers with an impedance of 6 to 16 Ω/ohms can

be connected for use as front speakers.

• Be careful when using two pairs of front speakers

(A + B) at the same time, since use of speakers with

an impedance of 12 to 16 Ω/ohms.

• Speakers with an impedance of 6 to 16 Ω/ohms can

be connected for use as center, surround and

surround back speakers.

• The protector circuit may be activated if the set is

played for long periods of time at high volumes

when speakers with an impedance lower than the

specified impedance are connected.

NOTE:

NEVER touch the speaker terminals when the

power is on.

Doing so could result in electric shocks.

Connecting the speaker cords

1. Loosen by turning

counterclockwise.

2. Insert the cord. 3. Tighten by turning

clockwise.

Speaker system connections

• Connect the speaker terminals with the speakers

making sure that like polarities are matched (

≈ with

≈ , √ with √ ). Mismatching of polarities will result

in weak central sound, unclear orientation of the

various instruments, and the sense of direction of

the stereo being impaired.

• When making connections, take care that none of

the individual conductors of the speaker cord come

in contact with adjacent terminals, with other

speaker cord conductors, or with the rear panel.

Protector circuit

• This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the

speakers under circumstances such as when the output of the power amplifier is inadvertently short-

circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or

when the unit is used at high output over a long period which results in an extreme temperature rise.

When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED

flashes. Should this occur, please follow these steps: be sure to switch off the power of this unit, check

whether there are any faults with the wiring of the speaker cables or input cables, and wait for the unit to

cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back on.

If the protection circuit is activated again even though there are no problems with the wiring or the

ventilation around the unit, switch off the power and contact a DENON service center.

Note on speaker impedance

• The protector circuit may be activated if the set is played for long periods of time at high volumes when

speakers with an impedance lower than the specified impedance (for example speakers with an

impedance of lower than 4 Ω/ohms) are connected. If the protector circuit is activated, the speaker output

is cut off. Turn off the set’s power, wait for the set to cool down, improve the ventilation around the set,

then turn the power back on.

1. Push the lever. 2. Insert the cord. 3. Return the lever.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1604 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1604

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info