Bedienungsanleitung Denon AVR-1712 (Seite 44 von 104) (Englisch)

583945

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

nHDMI control function (vpage41)

nSleep timer function (vpage42)

nAdjusting the volume of the speakers

(vpage43)

nQuick select function (vpage44)

nVarious memory functions (vpage44)

Playback (Basic operation) (vpage20)

Settings (vpage13)

Selecting a listening mode (Surround mode)

(vpage27)

Playback (Advanced operation)

Convenient functions

HDMI control function

If you connect the unit and an HDMI control function compatible TV or

player with an HDMI cable and then enable the HDMI control function

setting on each device, the devices will be able to control each other.

nOperations possible by HDMI control

•This unit power off can be linked to the TV power off step.

•You can switch audio output devices with a TV operation.

When you set “Output audio from amp” in the TV audio output

setup operation, you can switch the amp power on.

•You can adjust this unit volume in the TV volume adjustment

operation.

•You can switch this unit input sources through linkage to TV

input switching.

•When playing the player, this unit input source switches to the

source for that player.

•If you switch the input source of the unit to “TV”, you can

play TV audio with this unit (vpage6 “About ARC (Audio

Return Channel) function”).

•When “HDMI Control” (vpage 63) in the menu is set to

“ON”, signals input to the HDMI input connector are output to

the television or other device connected to the HDMI output

connector, even if the power of this unit is in standby (pass-

through function).

•To play the audio of a TV that does not support the ARC function

with the unit, connect the TV with an optical digital connection.

•To use the pass-through function, connect an HDMI connection

device that is compatible with HDMI control.

nSetting procedure

1Set the HDMI output connector corresponding with

the HDMI control function.

Set “HDMI Control” (vpage63) to “ON“.

2Turn the power on for all the devices connected by

HDMI cable.

3Set the HDMI control function for all devices

connected by HDMI cable.

•Please consult the operating instructions for the connected devices

to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

4Switch the television input to the HDMI input

connected to this unit.

5Switch this unit input to the HDMI input source and

check if the picture from the player is ok.

6When you turn the TV’s power to standby, check

that the power of this unit also goes to standby.

If the HDMI control function does not operate properly, check the

following points.

•Is the TV or player compatible with the HDMI control function?

•Is “HDMI Control” (vpage63) set to “ON”?

•Is “P.Off Control” (vpage63) set to “All” or “Video”?

•Are the HDMI control function settings of all devices correct?

Basic version

Advanced version

Information

Advanced version

vSee overleaf

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1712 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1712

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info