101346
13
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
ENGLISH
13
NOTE:
PHONO, TUNER and V. AUX cannot be selected.
Select OFF if nothing is connected.
15 OPT3 TAPE
CD DVD TV VCR1 VCR2 TAPE OFF
Use the (left) and (right) buttons to assign the input function connected
to the OPTICAL input 3 (OPT 3) terminal.
4
(right) button(left) button
Press the ENTER or (down) button to enter the setting and switch the
Component Video input (VIDEO1) setting.
(Initial)
Select OFF if nothing is connected.
Press the ENTER or (down) button to enter the setting and switch the
Auto Surround Mode setting.
16 VIDEO1 DVD
DVD TV VCR1 VCR2 V.AUX OFF
17 VIDEO2 TV
DVD TV VCR1 VCR2 V.AUX OFF
Input the type of components connected to the component video input terminals.
Setting the Video In Assignment
Use the (left) and (right) buttons to assign the input function connected
to the COMPONENT VIDEO 1 input (VIDEO1) terminal.
1
Use the (left) and (right) buttons to assign the input function connected
to the COMPONENT VIDEO 2 input (VIDEO2) terminal.
2
(right) button(left) button
Press the ENTER or (down) button to enter the setting and switch the
component video input 2 (VIDEO2) setting.
(right) button(left) button
Select OFF if nothing is connected.
(Initial)
(Initial)
18 AUTOSURR. ON
OFF ON
For the three kinds of input signals as shown below, the surround mode played the last is stored in the
memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and
the signal is played.
Note that the surround mode setting is also stored separately for the different input function.
SIGNAL Default Auto Surround Mode
q Analog and PCM 2-channel signals STEREO
w 2-channel signals of Dolby Digital, DTS or other multichannel format Dolby PLII Cinema
e Multichannel signals of Dolby Digital, DTS or other multichannel format Dolby or DTS Surround
Setting the Auto Surround Mode
Use the (left) and (right) buttons to select the Auto Surround mode.
1
(right) button(left) button
Press the ENTER or (down) button to switch the Ext. In SW Level setting.
(Initial)
19 EXT.IN SW +15
+00
+05
+10 +15
Set the method of playback of the analog input signal connected to the Ext. In terminal.
Setting the Ext. In SW Level
Use the (left) and (right) buttons to select the Ext. In Subwoofer channel
Level playback.
1
(right) button(left) button
Press the ENTER or (down) button if you want to start the settings over
from the beginning.
(Initial)
This completes the system setup operations. Once the system is set up, there is no need to make the settings
again unless other components or speakers are connected to or the speaker layout is changed.
After setting up the system
Press the SYSTEM SETUP button to finish system set up.
1
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denon-avr-1803

Suche zurücksetzen

  • Besitzt der AVR-1803 eine Stützbatterie? Mein gerät braut ca 2 miuten bis ein Sender frei ist Eingereicht am 1-12-2020 11:19

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-1803 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon AVR-1803

Denon AVR-1803 Bedienungsanleitung - Englisch - 131 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info