Bedienungsanleitung Denon AVR-1909 (Seite 33 von 81) (Englisch)

60741

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).

ZONE2 Setup

Make settings for audio playback in a ZONE2 system.

Level Lch

Adjust the left channel output level.

[Variable range]

–12dB

0dB

+12dB

[Variable range]

–12dB

0dB

+12dB

Level Rch

Adjust the right channel output level.

F Menu screen F

2.Manual Setup

2.HDMI Setup

1.Speaker Setup

4.ZONE2 Setup

5.Option Setup

3.Audio Setup

2-4.ZONE2 Setup

Level Lch : 0

Rch : 0

Vol.Limit : OFF

Power On Lev.: Last

Mute Lev. : Full

NOTE

“ZONE2 Setup” is displayed when ZONE2 is selected with “Amp

Assign” (vpage 29).



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

[Selectable items]

Last

: Use the memorized setting from the last session.

– – –

: Always use the muting on condition when power

is turned on.

[Variable range]

–70dB ~ +18dB

: Set the volume level when the power is turned on

in units of 1 dB.

[Selectable items]

Full

: The sound is cut off entirely.

–40dB

: The sound is attenuated by 40 dB.

–20dB

: The sound is attenuated by 20 dB.

Power On Level

Deﬁne the volume setting that is active when the power is turned

on.

Mute Level

Set the amount of attenuation when muting is on.

F Menu screen F

2.Manual Setup

2.HDMI Setup

1.Speaker Setup

4.ZONE2 Setup

5.Option Setup

3.Audio Setup

Option Setup

Make various other settings.

Amp Assign

Deﬁne how the ampliﬁer for the surround back speaker channels

is used.

The places where the surround back ampliﬁer are used can be set

freely according to the usage environment. This makes it possible to

output sound to rooms other than the room (the MAIN ZONE) where

surround playback is performed (multi-zone playback) or play the sound

with high quality using the front speakers (bi-amp connections).

[Selectable items]

7.1ch

: The surround back channel is output from the

speakers connected to the SURR.BACK/AMP

ASSIGN terminals.

ZONE2

: When ZONE2 power is on, the ZONE2 channel

is output from speakers connected to the SURR.

BACK/AMP ASSIGN terminals.

FrontA Bi-Amp

: The Front A channel for Bi-Amp use is output

from the speakers connected to the SURR.

BACK/AMP ASSIGN terminals.

FrontB Bi-Amp

: The Front B channel for Bi-Amp use is output

from the speakers connected to the SURR.

BACK/AMP ASSIGN terminals.

For details, see “Amp Assign / Multi-zone Connections and Operations”

(vpage 60 ~ 62).

2.Vol.Control

3.Source Delete

4.On-Screen Display

5.Quick Select Name

6.Remote ID Setup

7.2Way Remote

8.Display

9.Setup Lock

1.Amp Assign

2-5.Option Setup

[Selectable items]

OFF

: Do not set a maximum volume.

–20dB

: Set the maximum volume to –20 dB.

–10dB

: Set the maximum volume to –10 dB.

0dB

: Set the maximum volume to 0 dB.

Volume Limit

Make a setting for maximum volume.

Speciﬁcations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1909 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info