Bedienungsanleitung Denon AVR-2105 (Seite 24 von 50) (Englisch)

498701

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ENGLISH

•To increase the bass or treble: Turn the control

clockwise. (The bass or treble sound can be

increased to up to +6 dB in steps of 1 dB.)

•To decrease the bass or treble: Turn the

control counterclockwise. (The bass or treble

sound can be decreased to up to –6 dB in

steps of 1 dB.)

32 1

[1] Adjusting the sound quality (tone)

• The tone control function will not work in the direct mode.

After starting playback

The tone switches as follows each time the

TONE CONTROL button is pressed.

With the name of the volume to

be adjusted selected, turn the

SELECT knob to adjust the level.

SELECT

If you do not want the bass and treble to be

adjusted, turn on the tone defeat mode.

TONE

DEFEAT

The signals do not pass through

the bass and treble adjustment

circuits, so it provides higher

quality sound.

TONE 

CONTROL

BASS TREBLE

(Main unit)

[2] Listening over headphones

Plug the headphones’ plug

into the jack.

Connect the headphones to

the PHONES jack.

The pre-out output (including

the speaker output) is

automatically turned off when headphones

are connected.

PHONES

NOTE:

To prevent hearing loss, do not raise the volume level

excessively when using headphones.

Use this to turn off the audio

output temporarily.

Press the MUTING button.

Cancelling MUTING mode.

•Press the MUTING button again.

• Muting will also be cancelled when MASTER

VOL is adjusted up or down.

[3] Turning the sound off temporarily (MUTING)

(Main unit)

(Remote

control unit)

Simulcast playback

Use this switch to monitor a video

source other than the audio source.

Press the VIDEO SELECT button

repeatedly until the desired source

appears on the display.

Cancelling simulcast playback.

• Select “SOURCE” using the VIDEO SELECT

button.

• Switch the program source to the component

connected to the video input jacks.

[4]

Combining the currently playing sound with the desired image

[5] Checking the currently playing program source, etc.

On screen display

• Each time an operation is

performed, a description of that

operation appears on the

display connected to the unit’s

VIDEO MONITOR OUT jack.

Also, the unit’s operating status can be

checked during playback by pressing the

remote control unit’s ON SCREEN/DISPLAY

button.

Such information as the position of the input

selector and the surround parameter settings

is output in sequence.

BRIGHT MEDIUM

OFF

DIM

Using the dimmer function

• Use this to change the

brightness of the display.

The display brightness changes

in four steps (bright, medium,

dim and off) by pressing the

main unit’s DIMMER button repeatedly.

(Remote

control unit)

Display

IN=V SOURCE

(Remote

control unit)

(Remote

control unit)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2105 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2105

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info