Bedienungsanleitung Denon AVR-2106 (Seite 26 von 117) (Deutsch)

8584

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

ENGLISH

Basic Operation Basic Operation

• In addition, screen information is displayed in the following

order when the ON SCREEN button is pressed repeatedly:

OSD-1 Input signal

OSD-2 Input/output

OSD-3 Auto surround mode

OSD-4~10 Tuner preset stations

NOTE:

• OSD-3:

This is displayed when the auto surround mode is set to

“ON” and the input mode is set to “Auto”.

It is not displayed when the input mode is set to “Analog”

or “EXT. IN”.

2 Checking the input signal

The input signal can be checked by pressing the remote control

unit’s ON SCREEN button.

SIGNAL:

Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).

fs:

Displays the input signal’s sampling frequency.

FORMAT:

Displays the input signal’s number of channels.

“Number of front channels/Number of surround channels/ LFE

on/off”.

“SURROUND” is displayed for 2-channel signal sources

recorded in Dolby Surround.

OFFSET:

Displays the dialog normalization offset value.

FLAG:

Displays the special identification signal recorded in the input

signal.

“MATRIX” is displayed when matrix processing is conducted

on the surround back channel, “DISCRETE” is displayed when

discrete processing is conducted.

Not displayed if an identification signal has not been recorded.

STANDARD/NIGHT

FUNCTION INPUT MODE

2 Dialog normalization

The dialog normalization function is activated automatically when

playing Dolby Digital program sources.

Dialog normalization is a basic function of Dolby Digital which

automatically normalizes the dialog level (standard level) of the

signals which are recorded at different levels for different

program sources, such as DVD, DTV and other future formats

that will use Dolby Digital.

These contents can be verified with the ON SCREEN button.

Display

OFFSET - 4dB

The number indicates the normalization level when the

currently playing program is normalized to the standard level.

Adjusting the audio delay

• When watching a DVD or other video source, the picture on the

monitor may seem delayed with respect to the sound. In this

case, adjust the audio delay to delay the sound and synchronize

it with the picture.

• The audio delay setting is stored separately for each input

source.

• This adjustment can be performed with the system setup

( page 38) or from the remote control unit, as described

below.

STANDARD

CURSOR

INPUT MODE

ON SCREEN

ENTER

FUNCTION

Night mode

When listening at night or at lower volumes, the night mode

improves listenability.

Press and hold the STANDARD/NIGHT button for

several seconds to enter the night mode.

• Canceling night mode:

Press and hold the STANDARD/NIGHT button again.

• The night mode only works when playing program sources

recorded in Dolby Digital or DTS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2106 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2106

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info