ENGLISH
45
Advanced Setup – Part 1 Advanced Setup – Part 1
ENGLISH
2
Press the CURSOR
DD
or
HH
button to select
“Audio Delay”, then press the ENTER button.
• The “Audio Delay” screen appears.
3
Press the CURSOR
FF
or
GG
button to set the
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors’ lips is synchronized with the
sound.
4
Press the ENTER button to enter the setting.
• The “Advanced Playback” menu appears.
• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
Advanced playback
Setting the Audio Delay
1
Press the CURSOR
DD
or
HH
button to select
“Advanced Playback” at the “System Setup”
menu, then press the ENTER button.
• The “Advanced Playback” menu appears.
The surround mode used last for the three types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
Note that the surround mode setting is also stored separately for
the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY PLIIx Cinema)
e Multi-channel signals in the Dolby Digital, DTS or another
multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround
mode does not change even if the input signal is changed.
Setting the Auto Surround Mode
1
Press the CURSOR
DD
or
HH
button to select “Auto
Surround Mode” at the “Advanced Playback”
menu, then press the ENTER button.
• The “Auto Surround Mode” screen appears.
2
Press the CURSOR
FF
or
GG
button to select “ON”
if you want to use the auto surround mode, or
“OFF” if you do not want to use it.
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct mode, pure direct or
stereo mode (TONE DEFEAT “ON”).
4
Press the CURSOR
DD
or
HH
button to select
“Exit”, then press the ENTER button.
• The “System Setup” menu appears.
3
Press the ENTER button to enter the setting.
• The “Advanced Playback” menu appears.
