Bedienungsanleitung Denon AVR-2310CI (Seite 16 von 78) (Englisch)

584055

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

3

ENGLISH

Getting Started Playback Remote Control Information Troubleshooting SpeciﬁcationsMulti-ZoneSettings

Connecting Devices

NOTE

• These functions will not work if the device connected to the HDMI

terminal does not support Deep Color or x.v.Color signal transfer or

the Auto Lip Sync function.

• The HDMI control function may not work depending on the device it

is connected to and its settings.

• You cannot operate a TV or Blu-ray Disc player / DVD player that is

not compatible with the HDMI control function.

NOTE

When a device that does not support HDCP is connected, video

signals are not properly output.

Connecting Devices Equipped with

HDMI terminals

Important Information

n About HDMI

“HDMI” is the abbreviation of “High Deﬁnition Multimedia

Interface”. This interface allows transfer of digital video signals

and digital audio signals over a single HDMI cable.

n Functions usable with HDMI connections

Deep Color

Eliminates on-screen color banding, for smooth tonal transitions and

subtle gradations between colors.

x.v.Color

Enables displays with natural, vivid colors. “x.v.Color” is a Sony

registered trademark.

Auto Lip Sync (vpage 31)

HDMI 1.3 incorporates an automatic video/audio synching capability

that allows devices to perform this synchronization automatically with

total accuracy.

HDMI control function (vpage 31, 54)

This function allows you to operate external devices from the receiver

and operate the receiver from external devices.

“HDMI”, “HDMI logo” and “High-Deﬁnition Multimedia Interface”

are trademarks or registered trademarks of HDMI Licensing LLC.

NOTE

• Connect the speaker cables in such a way that they do not stick out

of the speaker terminals. The protection circuit may be activated if

the core wires touch the rear panel or if the + and – sides touch each

other (v “Protection circuit”).

• Never touch the speaker terminals while the power

supply is connected. Doing so could result in electric shock.

1 Peel off about 10 mm of sheathing from the tip

of the speaker cable, then either twist the core

wire tightly or terminate it.

2 Turn the speaker terminal counterclockwise

to loosen it.

3 Insert the speaker cable’s core wire to the hilt

into the speaker terminal.

4Turn the speaker terminal clockwise to tighten

it.

Use speakers with an impedance of 6 to 16 Ω/ohms. When using front

A and B speakers simultaneously, use speakers with an impedance of

12 to 16 Ω/ohms.

n When using a banana plug

Tighten the speaker terminal ﬁrmly before

inserting the banana plug.

Connecting the Speaker Cables

Carefully check the left (L) and right (R) channels and + (red) and –

(black) polarities on the speakers being connected to the AVR-2310CI,

and be sure to interconnect the channels and polarities correctly.

wq wq

(R) (L)

When in the “Front A Bi-Amp” and “Front B Bi-Amp” modes, the

same signals are output from the front speaker terminals and the AMP

ASSIGN terminals.

About bi-amp connections

These connections make for higher quality playback sound with no

interference between the signals of the bass and treble units.

When the ampliﬁer assignment mode is set to “Front A Bi-Amp” or

“Front B Bi-Amp”, connect as shown below. (The illustration shows a

connection example for the front B Bi-Amp speakers.)

NOTE

• Use speakers compatible with bi-amp connections.

• When making bi-amp connections, be sure to remove the short-

circuiting plate or wire between the speaker’s woofer and tweeter

terminals.

Front speakers B

n Copyright protection system (HDCP)

The AVR-2310CI supports HDCP (High-bandwidth Digital Contents

Protection). HDCP is a copyright protection technology for digital video

signals. The devices connected to the AVR-2310CI must also support

HDCP.

Connecting the Speakers

AVR-2310CI

Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2310CI Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2310CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info