Bedienungsanleitung Denon AVR-2311 (Seite 35 von 94) (Englisch)

498702

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

ENGLISH

Advanced versionSimple version InformationBasic version

DENON original surround playback

Playing the source (vpage 22 – 28).

Press SIMULATION to select the

surround mode.

• Each time SIMULATION is pressed, the

surround mode is switched.

MULTI CH

STEREO

This mode is for enjoying stereo sound from all

speakers.

ROCK ARENA

This mode is for enjoying the atmosphere of a live

concert in an arena.

JAZZ CLUB

This mode is for enjoying the atmosphere of a live

concert in a jazz club.

MONO MOVIE

This mode is for playing monaural movie sources

with surround sound.

VIDEO GAME

This mode is suited for achieving surround sound

with video games.

MATRIX

This mode lets you add a spacious feel to stereo

music sources.

VIRTUAL

This mode is for enjoying surround effects using

only the front speakers or headphones.

z When playing sources recorded in monaural in the “MONO

MOVIE” mode, the sound will be off balance with a single

channel (left or right), so input to both channels.

Depending on the program source being played, it may not be possible

to achieve a satisfactory surround effect. In this case, try other modes

to achieve a sound ﬁeld suited to your tastes.

NOTE

When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD

or DTS Express, you cannot select DENON original surround mode.

Stereo playback

This is the mode for playing in stereo. The tone can be adjusted.

• Sound is output from the front left and right speakers and subwoofer.

• If multichannel signals are input, they are mixed down to 2-channel

audio and are played.

Playing the source (vpage 22 –

28).

Press D/ST to select “STEREO”.

Stereo playback begins.

Direct playback

Sound recorded in source is played as is.

• Surround back signals or front height signals are not created.

• In this mode, the following items cannot be adjusted.

• Tone (vpage54) • MultEQ

(vpage55)

• Dynamic EQ

(vpage55) • Dynamic Volume

(vpage56)

• RESTORER (vpage57)

Playing the source (vpage 22 –

28).

Press D/ST to select “DIRECT”.

Direct playback begins.

Pure direct playback

This mode is for playback in higher sound quality than in “Direct

playback” mode.

• The following circuits that affect sound quality are set to off.

• Main unit’s display circuit (The display is turned off.)

• Analog video input/output circuit

• Surround back signals or front height signals are not created.

• In this mode, the following items cannot be adjusted.

• Tone (vpage54) • MultEQ

(vpage55)

• Dynamic EQ

(vpage55) • Dynamic Volume

(vpage56)

• RESTORER (vpage57)

Playing the source (vpage 22 –

28).

Press PURE.

The display goes dark, and pure direct

playback begins.

• To cancel, press PURE again.

• Video signals are only output when HDMI signals are played in the

PURE DIRECT mode.

• If

PURE DIRECT on the main unit

is pressed, the same function as

with the remote control unit can be

obtained.

NOTE

When in the PURE DIRECT mode, the menu screen is not displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info