Bedienungsanleitung Denon AVR-2311 (Seite 45 von 94) (Englisch)

498702

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Convenient functions

Quick select function

All of the settings in step 1 can be memorized together. By memorizing

frequently used settings, you can quickly access and enjoy a playback

environment that is consistently the same.

n Saving the settings

Set the items below to the settings you want to save.

q Input source (vpage21)

w Volume (vpage21)

e Surround mode (vpage29)

r Video Select (vpage50)

t Audyssey Setting

(MultEQ

, Dynamic EQ

, Dynamic

Volume

) (vpage55)

Press and hold the desired QUICK SELECT until

“Memory” appears on the display.

The current settings will be memorized.

GQuick Select DefaultsH

Input source Volume

QUICK SELECT 1 BD –40 dB

QUICK SELECT 2 SAT/CBL –40 dB

QUICK SELECT 3 DOCK –40 dB

n Recalling the settings

Press QUICK SELECT at which the

settings you want to call out are saved.

The , or indicator illuminates on

the display.

Naming quick select settings

See “Quick Select Name” (vpage65).

• The Quick Select function can be set separately for the different

zones (vpage43 “Quick select function”).

• If QUICK SELECT on the main unit

is pressed, the same function as

with the remote control unit can be

obtained.

NOTE

Input sources stored with the quick select function cannot be selected

if they have been deleted at “Source Delete” (vpage64). In this case,

store them again.

REC OUT mode

When using the audio/video recording connectors (DVR outputs), you

can record the audio or video from a different program source while

listening to the currently played track.

Press ZONE2/REC SELECT.

“ZONE2 Source” is shown on the display.

Turn SOURCE SELECT until “RECOUT

Source” is displayed.

The indicator illuminates.

ZONE2 Source ZONE2 TUNER ZONE2

USB/iPod

····

RECOUT USB/iPod RECOUT DOCK RECOUT Source

····

Turn SOURCE SELECT to choose the input source to

be recorded.

• For operating instructions, refer to the respective equipment’s

operating instructions.

• To record FM or AM broadcasts, select the broadcast (vpage25).

Start recording.

• For operating instructions, refer to the respective equipment’s

operating instructions.

• To cancel, press ZONE2/REC SELECT, then turn SOURCE SELECT

until “ZONE2 Source” is displayed.

• Make a test recording before starting the actual recording.

• The digital signals are not output to the analog REC OUT connectors.

• As the digital audio signal input from the HDMI connector is not

output to the digital recording connector (OPTICAL), you should

connect using the OPTICAL and COAXIAL connectors.

• Sources selected with the REC OUT mode are output from ZONE2

as well.

• The operable buttons on the remote control unit in REC OUT mode

while it is in the operating mode for ZONE2 are as follows:

• ZONE/DEVICE power button

• Muting button

• Master volume control button

NOTE

• Recordings you make are for your personal enjoyment and should

not be used for other purposes without permission of the copyright

holder.

• Input sources for which “Delete” is selected at “Source Delete”

(vpage64) cannot be selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info