Bedienungsanleitung Denon AVR-2311 (Seite 65 von 94) (Englisch)

498702

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Manual Setup

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁrm the setting Return to previous menu

HDMI Setup

Default settings are underlined.

Make settings for HDMI video/audio output.

Setting items Setting details

RGB Range

Set the video range of RGB

output from the HDMI

connector.

Normal : Output with RGB video range (16 (black) to 235 (white)).

Enhanced : Output with RGB video range (0 (black) to 255 (white)).

This setting is active when using a TV equipped with a DVI terminal.

Auto Lip Sync

Make automatic

compensation for timing

shift in audio and video

output.

ON : Compensated.

OFF : Not compensated.

HDMI Audio Out

Select HDMI audio output

device.

AMP : Play back through speakers connected to the receiver.

TV : Play back through TV connected to the receiver.

When the HDMI control function is activated, priority is given to the TV

audio setting (vpage39 “HDMI control function”).

HDMI Control

You can link operations with

devices connected to HDMI

and compatible with HDMI

Control.

ON : Use HDMI control function.

OFF : Do not use HDMI control function.

• When a device that is not compatible with the HDMI control function is

connected, set “HDMI Control” to “OFF”.

• Please consult the operating instructions for each connected component

to check the settings.

• Refer to “HDMI control function” (vpage39) for more information about

the HDMI control function.

NOTE

• When “HDMI Control” is set to “ON”, it consumes more standby

power. If you are not using this unit for an extended period, it is

recommended that you unplug the power cord from the power outlet.

• “HDMI Control” does not work when the power to the equipment is off.

Either turn power on or set to standby.

• The HDMI control function controls operations of a TV that is compatible

with the HDMI control function. Make sure that the TV and HDMI are

connected when you perform HDMI control.

• If the “HDMI Control” settings have been changed, always reset the

power to connected devices after the change.

Standby Source

Sets the HDMI input source

to put into standby when

the power is on.

Last : This item is set at the last-used input source.

HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 : Put the respective

input source into standby.

“Standby Source” can be set when “HDMI Control” is set to “ON”.

Setting items Setting details

Power Off Control

Links the power standby

of this unit to external

equipment.

All : If power to a connected TV is turned off independently of the input

source, power to this unit is automatically set to standby.

Video : If power to a connected TV is turned off when the input source is

BD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX / DOCK, power to this unit

is automatically set to standby.

OFF : This unit does not link with power to a TV.

“Power Off Control” can be set when “HDMI Control” is set to “ON”.

Audio Setup

Default settings are underlined.

Make settings for audio playback.

Setting items Setting details

2ch Direct/Stereo

Select the method for

setting the speakers used

in the 2-channel direct and

stereo playback modes.

Setting : Select the method for setting the speakers used in the 2-channel

direct and stereo playback modes.

• Basic : The settings at “Speaker Setup” (vpage58) are applied.

• Custom : Make separate settings for 2-channel. Make the following

settings:

Front : Set the front speaker size.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

If “Speaker Conﬁg.” – “Subwoofer” (vpage58) is set to “No”, the

setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

• Yes : Use a subwoofer.

• No : Select when a subwoofer is not connected.

If “Speaker Conﬁg.” – “Subwoofer” (vpage58) is set to “No”, the

setting is automatically set to “No”. If the “Front” setting is “Small”,

the setting is automatically “Yes”.

SW Mode : Select low range signals to be reproduced by subwoofer.

• LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”,

the LFE signal alone is output from the subwoofer. Also, when the “2ch

Direct/Stereo” – “Front” setting is set to “Small”, the front channel low

range signal is added to the LFE signal output from the subwoofer.

• LFE+Main : The front channel low range signal is added to the LFE signal

output from the subwoofer.

This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is

set to “Yes”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info