Bedienungsanleitung Denon AVR-2311 (Seite 71 von 94) (Englisch)

498702

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit

enables you to operate devices made by other manufacturers.

Operating AV equipment

Press ZONE SELECT to select a

zone for operation.

The zone mode indicator corresponding

to the operating zone lights.

• The mode switches each time ZONE

SELECT

is pressed.

MAIN

Select for the operations in

MAIN ZONE.

ZONE2

Select for the operations in

ZONE2.

ZONE3

Not used.

• If setting of “Specifying the zone used with

the remote control unit” (vpage71) is “2”,

operations in MAIN ZONE and ZONE2 are

enabled.

Press the input source select button (vpage 21).

• The input source for the zone selected in step 1 is switched.

• The operation mode of the remote control unit is switched as

shown in the table.

Input

source

button

Input source

of this unit

Devices controllable with the remote

control unit

(Operation mode)

– This unit (ampliﬁer operation)

Device registered on the

BD button

DVD

Device registered on the

DVD button

Device registered on the

TV button

SAT/CBL

Device registered on the SAT/CBL button

DVR

Device registered on the

DVR button

GAME

Device registered on the

GAME button

V.AUX

Device registered on the

V.AUX button

Device registered on the

CD button

USB/iPod or

DOCK

iPod connected to the USB port or

control dock for iPod.

DOCK Control dock for iPod

USB/iPod

iPod or USB memory device connected

to the USB port

TUNER Radio of this unit

z If a preset code is registered for this button, the remote control

unit of this unit can control another devices.

NOTE

If the mode of the remote control unit is set to other than amp-

operation mode, press AMP to switch the remote control unit to the

amp-operation mode to perform the following operations:

• For menu operation by pressing MENU

• For setting the channel level of the unit by pressing CH LEVEL

• For turning power in each zone on or off by pressing ZONE/DEVICE

or ZONE/DEVICE OFF.

Operate this unit or the device whose input source is

switched.

• For details, refer to the operating instructions for each device.

For operations of iPod, TUNER, and USB, see the following pages.

• iPod (vpage23, 24)

• TUNER (vpage27)

• USB memory device (vpage28)

Registering preset codes

When preset codes are registered in the included remote control unit,

it can then be used to operate any devices you have, such as DVD

players or TVs made by different manufacturers.

In this menu, you can search and display the preset codes that can be

preset in the included remote control unit.

n Buttons used for operating the devices

q ZONE/DEVICE ON, ZONE/DEVICE OFF

For switching power of each device on or off.

w uio p, ENTER, RETURN

For menu operation of each device.

e MENU, SETUP, TOP MENU

For displaying the menu of each device.

r 1, 2, 3, 6, 7, 8, 9

t Number button (0 – 9, +10)

y CH +, CH –

u TV POWER, TV INPUT

For operating a TV

This button is enabled in any mode.

For details on operation with the remote control unit, see pages 23

to 28, 70.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info