Bedienungsanleitung Denon AVR-2311CI (Seite 29 von 90) (Englisch)

584186

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

Specify a name for the preset broadcast station

(Preset Name) (vpage48)

n Listening to preset stations

Press SHIFT to select the memory

block (A to G).

Press CH +, CH – or 1 – 8 to select

the desired preset channel.

You can also operate via the main unit.

In this case, perform the following

operations.

Press TUNING PRESET, then turn SOURCE

SELECT

to select the preset radio station.

n Direct frequency tuning

You can enter the receiving frequency directly to tune in.

Press SEARCH.

Input frequencies using the 0 – 9.

• If o is pressed, the immediately preceding

input is cancelled.

When setting is completed, press

ENTER.

The preset frequency is tuned in.

n Check the HD Radio reception information

Press STATUS while an HD Radio

broadcast is being received.

The current reception information is

shown on the display.

q Normal

w Frequency / Signal strength

e Station name / Program and Program type

r Title name / Artist name

t Album name / Genre name

NOTE

If the station signal weakens while receiving a digital broadcast (while

and text is displayed), the mode automatically switches to the

analog reception mode (the reception frequency is displayed).

Because of this, the indicator and text may ﬂicker if the station

signal level is weak and unstable.

n Tuner (HD Radio reception) operation

Operation buttons Function

CH +, – Preset channel selection

MENU Amp menu

uio p

Cursor operation /

Multicast switching (ui)

ENTER Enter

SEARCH Direct frequency tuning

RETURN Return

BAND FM/AM switching

MODE Switch search modes

TUNING df

Tuning (up/down)

0 – 9

Preset channel selection (1 – 8) /

Direct frequency tuning (0 – 9)

SHIFT Preset channel block selection

MEMORY Preset memory registration

TV POWER TV power on/standby (Default : SONY)

TV INPUT Switch TV input (Default : SONY)

Tuning in radio stations

n Presetting radio stations (Manual preset)

Your favorite broadcast stations can be preset so that you can tune

them in easily. Multicasts can also be preset. Up to 56 stations can

be preset.

• Stations can be preset automatically at “Auto Preset”

(vpage47). If “Auto Preset” is performed after performing “Manual

Preset”, the “Manual Preset” settings will be overwritten.

Tune in the broadcast station you

want to preset.

Press MEMORY.

Press SHIFT to select the block

(A to G) in which to preset the

channel (1 to 8 per block), then

press CH +, CH – or 1 – 8 to select

the preset number.

Press MEMORY again to complete the setting.

• To preset other stations, repeat steps 1 to 4.

Default settings

Block (A – G)

and

Channel (1 – 8)

Default Settings

A1 – A8

87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /

100.1 MHz

B1 – B8

101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1

/ 90.1 MHz

C1 – C8

530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 /

1710 kHz

D1 – D8 90.1 MHz

E1 – E8 90.1 MHz

F1 – F8 90.1 MHz

G1 – G8 90.1 MHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311CI Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info