Bedienungsanleitung Denon AVR-2311CI (Seite 39 von 90) (Englisch)

584186

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

Set up “Amp Assign”

Use ui to select “Amp Assign”, and

then press ENTER.

[1/6]

STEP1 Preparation

Connect the speakers

and place them accord-

ing to the recommenda-

tions in the manual.

Set the following

items if necessary.

Set use of surround back ch. for your system

Amp Assign

Channel Select

Auto Setup Start

AUTO SETUP

AUDYSSEY AUTO SETUP

MultEQ

ENTER Enter RETURN Cancel

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁrm the setting Return to previous menu

Use o p to select the conguration

of the connected speakers, and then

press RETURN.

Normal

Set when using 7.1-channel

(Front/Center/Surround/Surround

Back/Subwoofer) speakers.

ZONE2

Set for connecting the speakers

for ZONE2 to the SURR. BACK/

AMP ASSIGN terminals.

Front Height

Set for connecting the front

height speakers to the SURR.

BACK/AMP ASSIGN terminals.

Bi-Amp

Set for connecting a tweeter of

a front speaker to the SURR.

BACK/AMP ASSIGN terminals

and a woofer of the front speaker

to the FRONT terminals.

Front B

Set for connecting the second

set of front speakers to the

SURR. BACK/AMP ASSIGN

terminals.

2CH

Set for 2-channel direct/stereo

playback. When “2CH” is set,

connect the second set of front

speakers to the SURR.BACK/

AMP ASSIGN terminals.

Here we describe how to set up speakers other than 5.1-channel speakers.

For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers (Audyssey

Auto Setup)” (vpage6).

First install and connect the speakers to this unit.

Before Auto Setup measurement, the settings shown below can be made.

• Changing the ampliﬁer assignment (Amp Assign)

The signal output from the SURR.BACK / AMP ASSIGN speaker terminal of this unit can be switched to match your speaker environment (vpage36 “Set up “Amp Assign””).

• Setting the channels to be used (Channel Select)

If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced (vpage37 “Set up “Channel Select””).

Set up

the remote control unit

n Set up the zone mode

Press ZONE SELECT to switch the

zone mode to “MAIN”.

The “MAIN” indicator lights.

Press ZONE SELECT

n Set up the operation mode

Press AMP to set the remote control

unit to amplier operation mode.

Press AMP

Connect the setup microphone.

When the setup microphone is

connected, the following screen is

displayed.

[1/6]

STEP1 Preparation

Connect the speakers

and place them accord-

ing to the recommenda-

tions in the manual.

Set the following

items if necessary.

Start Auto Setup

Amp Assign

Channel Select

Auto Setup Start

AUTO SETUP

AUDYSSEY AUTO SETUP

MultEQ

ENTER Enter RETURN Cancel

Set up speakers

around items indicate the settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2311CI Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2311CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info