Advanced Operation Advanced Operation
40
ENGLISH
ENGLISH
• When the outputs of the ZONE2 output terminals are wired and connected to power amplifiers
installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in
which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.)
• Settings can be made at “Power Amp Assign” in the “System Setup Menu” so that the same
source as the ZONE2 output terminals can be played from the speakers connected to the ZONE2
speaker terminals ( page 21).
To control playback devices other than the ones above, either use that device’s remote control
unit or preset a separately sold programmable remote control unit.
Multi zone music entertainment system
• For instructions on installation and operation of separately sold devices, refer to the devices’
operating instructions.
Multi-zone playback using the ZONE2 output terminals
2 When using the power amplifier as the MAIN ZONE output
The AVR-2807 is equipped with ZONE2 output terminals for which the volume is fixed output level
and composite video output terminals as the ZONE2 output terminals.
[System configuration and connections example]
• Using this AVR-2807 external amplifier as the ZONE2.
MAIN ZONE 7.1-channel systems
ZONE2
Monitor
DVD player
AVR-2807
ZONE2 Audio out
(Fixed out)
ZONE2
Video out
Premain Amplifier
Input
Monitor
Multi-zone playback using the SPEAKER terminals
2 When using the SURROUND BACK amplifier as the ZONE2 output
When the surround back’s power amplifier is assigned to the ZONE2 output channel at “Power
Amp Assign” in the “System Setup Menu”, the surround back speaker terminals can be used as
the ZONE2 speaker out terminals ( page 54).
: Multi source audio signal cable
: Multi source video signal cable
: Speaker cable
Refer to “Connections” ( page 21).
[System configuration and connections example]
• Using this AVR-2807 internal amplifier as the ZONE2.
