Bedienungsanleitung Denon AVR-2808 (Seite 31 von 96) (Englisch)

65891

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

• When the menu “Speaker Conﬁguration” – “Surround Back Speaker”

setting (vpage 26) is set to “1spkr”, the surround back speaker

display is set to “Surround Back Speaker”.

• Speakers set to “None” in the “Speaker Conﬁguration” settings are

not displayed.

• When “Channel Level” is adjusted, the adjusted values are set for

all the surround modes. To adjust the channel level separately for the

different surround modes, use the operation see page 49.

Distance measurement

Select the speaker you want to set, then set the distance.

Set the value closest to the measured distance.

[Variable range]

0.00m ~ 18.00m

: Display when “Meters” is set.

0.0ft ~ 60.0ft

: Display when “Feet” is set.

Test Tone

Select test tone playback method.

[Selectable items]

Auto

: Automatically switch speaker from which test tone is

output.

Manual

: Manually switch speaker from which test tone is output.

Channel Level

Adjust channel levels to obtain equal volume from all speakers.

Operating from the main remote control unit

Adjusting with the main remote control unit using the test tones is

only possible in the “Auto” mode and only effective in the STANDARD

(Dolby/DTS Surround) mode. The adjusted levels for the different

modes are automatically stored in the memory.

GAdjusting using test tonesH

q Press the TEST button.

Test tones are output from the various speakers.

w Use the o p button to adjust so that the volume is equal for all

speakers.

e When the adjustments are completed, press the TEST button

again.

Test Tone Start

Output test tone.

[Variable range]

–12dB

0dB

+12dB

NOTE

Set the distance between the listening position and the various

speakers to no more than 6.00 meters (20.0 ft).

Default

Resets the settings to the default values.

Crossover Frequency

Select crossover frequency from which subwoofer handles low

range signal.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Only the portion of the bass sound of the various speakers output

from the subwoofer that has a frequency below the frequency set

here is output.

Set this according to the low frequency reproduction capabilities of the

speakers you are using.

Advanced

Set the crossover frequency separately for the different speakers.

• The “Crossover Frequency” can be set when there are speakers that

have been set to “Small” at menu “Speaker Conﬁguration” or when

“Subwoofer” is set to “Yes” (vpage 26).

• At the “Advanced” settings, if the menu “Subwoofer Setup” setting

is set to “LFE”, speakers for which “Speaker Conﬁguration” is set to

“Small” can be set. If set to “LFE+Main”, the setting can be made

regardless of the speaker size.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• Always set the crossover frequency to “80 Hz”. When using small

speakers, however, we recommend setting the crossover frequency

to a higher frequency.

HDMI Setup

Make settings for HDMI video/audio output.

F Menu screen F

2.Manual Setup

2.HDMI Setup

1.Speaker Setup

4.Zone Setup

5.Option Setup

3.Audio Setup

HDMI Audio Setup

Make settings for HDMI audio output.

2.HDMI Video Setup

1.HDMI Audio Setup

2-2.HDMI Setup

HDMI Audio Out

Select HDMI audio output device.

[Selectable items]

AMP

: Use speakers connected to receiver for audio playback.

: Use speakers of monitor for audio playback.

Auto Lipsync

Automatic compensation for timing shift in audio and video output.

[Selectable items]

: Use automatic compensation.

OFF

: Do not use automatic compensation.

Setup

1.AVR2808E2_ENG.indd 31 2007/09/28 11:41:23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2808 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info