Bedienungsanleitung Denon AVR-2808 (Seite 36 von 96) (Englisch)

65891

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Tuner Information

This sets the time the on-screen display is displayed when an operation

is performed.

[Selectable items]

Always

: Show display continuously.

30sec

: Show display for 30 seconds after operation.

10sec

: Show display for 10 seconds after operation.

OFF

: Turn display off.

Display Mode

Select the on-screen display's display mode.

[Selectable items]

Mode1

: If there is no video signal, ﬂickering of the on-screen display

is not prevented.

Mode2

: Prevents ﬂickering of the on-screen display when there is

no video signal.

Use this mode if the on-screen display does not appear

in the Mode 1, as may happen according to the TV being

used.

Quick Select Name

Change the Quick Select name.

Up to 16 characters can be input.

[Input characters]

A ~ Z

a ~ z

0 ~ 9

! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)

Trigger Out

Select the conditions to turn on the trigger out with respect to the

zone, input source, surround mode. For details about the trigger

out function, see page 19.

iPod Information

This sets the time the on-screen display is displayed when an operation

is performed.

[Selectable items]

Always

: Show display continuously.

30sec

: Show display for 30 seconds after operation.

10sec

: Show display for 10 seconds after operation.

OFF

: Turn display off.

Remote ID Setup

Set remote control ID.

Match the ID setting of the remote control unit and the receiver.

When changing the remote ID, also change the AMP, iPod and TU

modes of the main remote control unit at the same time (vpage

54).

2Way Remote

Make setting for 2-way remote control unit.

[Selectable items]

Match the ID setting of the remote control and the receiver.

[Selectable items]

Used

: Use 2-way remote control.

Not Used

: Do not use 2-way remote control.

When using a 2-way remote control unit (RC-7000CI and RC-7001RCI,

sold separately), set this to “Used”.

Display

Adjust display brightness of the receiver.

Operating from the main unit

Press the DIMMER button.

Bright Dim

DarkOFF

[Selectable items]

Bright

: Normal display brightness.

Dim

: Reduced display brightness.

Dark

: Very low display brightness.

OFF

: Display is off unless controls are operated.

Setting with Respect to the Input Source

When the input source set to on is selected, the trigger out turns on.

Setting with Respect to the Surround Mode

• When the surround mode set to on is selected, the trigger out turns

on.

• Associated with respect to surround modes that are set to “ON”.

• This can be set if the “MAIN ZONE” is selected at “Selecting the

Zone”.

• Associated when an input source for which “Setting with Respect to

the Input Source” is set to “ON” is selected.

Select “Trigger Out 1” or “Trigger Out 2” and make the settings below

respectively.

Setup

Selecting the Zone

Select the zone for which the trigger out is set.

[Selectable items]

: Activate trigger on this mode.

– – –

: Do not activate trigger on this mode.

1.AVR2808E2_ENG.indd 36 2007/09/28 11:41:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2808 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info