Bedienungsanleitung Denon AVR-2808CI (Seite 47 von 96) (Englisch)

584190

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Presetting Radio Stations

(Preset Memory)

Your favorite broadcast stations can be preset so that you can tune

them in easily. Up to 56 stations can be preset.

Tune in the broadcast station you want to preset.

Press [MEMO].

Press [A ~ G] to select the block in which the station is

to be preset, then press [CHANNEL] or [1 ~ 8] to select

the preset number.

b The memory block can also be selected by pressing [SHIFT].

Press [MEMO] again to complete the setting.

• To preset other stations, repeat steps 1 to 4.

• Stations can be preset automatically at menu “Input Setup” – “Auto

Preset” (vpage 34).

NOTE

Preset stations are erased by overwriting them.

Either turn <SOURCE SELECT> or press [TUNER]

(AMP mode) to select “TUNER”.

To operate using the main remote control unit, set the

remote control unit to the TUNER ( ) mode.

(vpage 51 “Remote Control Unit Operations”)

Press [BAND] to select “FM” or “AM”.

Tune in the desired broadcast station.

q To tune in automatically (Auto Tuning)

Press [MODE] to light the “AUTO” indicator on the display, then use

[df] to select the station you want to hear.

w To tune in manually (Manual Tuning)

Press [MODE] to turn off the display’s “AUTO” indicator, then use

[df] to select the station you want to hear.

Listening to FM/AM Broadcasts

• It is also possible to switch to “FM” or “AM” in step 1 by pressing

[TUNER].

• If the desired station cannot be tuned in with auto tuning, tune it in

manually.

• When tuning in stations manually, press and hold [df] to change

frequencies continuously.

• The time for which the menus are displayed can be set at menu

“Manual Setup” – “Option Setup” – “On-Screen Display” (vpage

31, 32).

Basic Operation

Press <TUNING PRESET>, then turn <SOURCE SELECT>

to select the preset radio station.

Listening to Preset Stations

Operation on the Main Unit

Operation on the Main Remote Control Unit

Press [A ~ G] to select the memory block.

Press [CHANNEL] or [1 ~ 8] to select the desired preset

channel.

n Default settings

Auto tuner presets

A1 ~ A8

87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /

90.1 MHz

B1 ~ B8

520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,

90.1 / 90.1 MHz

C1 ~ C8

90.1 MHz

D1 ~ D8

90.1 MHz

E1 ~ E8

90.1 MHz

F1 ~ F8

90.1 MHz

G1 ~ G8

90.1 MHz

Playing Video and Audio Equipment

Prepare the equipment.

q Load the DVD, CD or other software in the player.

(vSee the operating instructions of the respective devices.)

w To play a video device, switch the monitor input.

(vSee the monitor’s operating instructions.)

To operate using the main remote control unit, set the

remote control unit to the AMP mode.

(vpage 51 “Remote Control Unit Operations”)

Use SOURCE SELECT to select the input source.

Start playback.

(vSee the operating instructions of the respective devices.)

Basic Operation



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

AVR2808CIEU.indd 47 2007/06/20 8:58:18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2808CI Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2808CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info