Bedienungsanleitung Denon AVR-3310 (Seite 46 von 112) (Englisch)

498655

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite



Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Making Detailed Settings (Manual Setup)

Setting items Setting contents

Trigger Out 1

Select the condition for

activating Trigger Out 1 for

the input source, surround

mode, etc.

See “TRIGGER OUT jacks”

(vpage 21) for more

information on trigger out.

When Setting for Zone (MAIN ZONE / ZONE2 / ZONE3)

Trigger out is activated through linkage to the power of the zone set to

“ON”.

When Setting for Input Source

Activate trigger out when the input source set to “ON” is selected.

Valid for the zone set to “ON” with “When Setting for Zone”.

When Setting for Surround Mode

Activate trigger out when the surround mode set to “ON” is selected.

Valid when the “MAIN ZONE” set to “ON” with “When Setting

for Zone” is selected, and when the input source set to “ON” with

“When Setting for Input Source” is selected.

ON : Activate trigger on this mode.

– – – : Do not activate trigger on this mode.

•

Trigger Out 2

As with “Trigger Out 1”,

select the condition for

activating Trigger Out 2.

Remote ID

Set when you operate

another DENON AV ampliﬁer

with the remote control unit

of the AVR-3310. Match the

remote control unit you are

using with the remote ID of

the AVR-3310.

1 / 2 / 3 / 4

When using the AVR-3310 with only the included main remote control

unit (RC-1118), use Remote ID “1” (default).

When using the included sub remote control unit (RC-1121) and a

separately sold remote control unit (RC-7000CI, etc.), this function

can be used. Match the ID setting of the remote control unit and the

receiver.

232C Port

Set when using an external

controller or two-way remote

control connected to the RS-

232C terminal.

Serial Control : Set when using an external controller.

2Way Remote : Set when using a 2-way remote control unit.

When using a DENON two-way remote control (RC-7000CI or RC-

7001RCI, sold separately), set to “2Way Remote”.

NOTE

When setting to “2Way Remote”, you can not use the RS-232C connector

as an external controller.

Dimmer

Adjust display brightness of

the receiver.

Bright : Normal display brightness.

Dim : Reduced display brightness.

Dark : Very low display brightness.

OFF : Turns the display off.

Setting items Setting contents

Setup Lock

Protect settings from

inadvertent change.

OFF : Turn protection off.

ON : Turn protection on.

When “Setup Lock” is set to “ON”, the settings listed below can no

longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt

to operate related settings.

· GUI menu operations · Dynamic Volume

· RESTORER · Channel Level

· Audio/Video Adjust · Audio Delay

· MultEQ · Input Mode

· Dynamic EQ

When canceling the setting, set “Setup Lock” to “OFF”.

•

Maintenance Mode

Used when receiving

maintenance from a DENON

service engineer or custom

installer.

NOTE

Only use this function if so instructed by a DENON serviceperson or

installer.

Firmware Update

Update the ﬁrmware of the

receiver.

Check for Update : You can check for ﬁrmware updates. You can also

check approximately how long it will take to complete an update.

Start : Execute the update process.

When updating starts, the power indicator becomes red and the GUI

screen is shut down. The amount of update time which has elapsed is

displayed.

When updating is complete the power indicator becomes green and

normal status is resumed.

If updating fails, the set automatically retries, but if updating is still not

possible, one of the messages shown below is displayed. If the display

reads as shown below, check the settings and network environment,

then update again.

Display Description

Updating failed Updating failed.

Server is busy Server is busy. Wait a while then try again.

Connection fail Failure connecting to server.

Download fail Downloading of the ﬁrmware has failed.

Main remote control

operation buttons

:Displaying the menu

Cancel the menu

:Moves the cursor

(Up/Down/Left/Right)

:Conﬁrm the setting :Return to previous menu

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-3310 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-3310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info