Bedienungsanleitung Denon AVR-3310 (Seite 62 von 112) (Englisch)

498655

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite



Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Speciﬁcations

ENGLISH

Playback preparation.

q Check the network environment, then turn on the AVR-

3310’s power (vpage 22 “Connecting to a Home

Network (LAN)”).

w If settings are required, make the “Network Connecting”

(vpage 37).

e Prepare the computer (vComputer’s operating

instructions).

r Set [DEVICE SELECT 1] to “MAIN/TV” [DEVICE SELECT 2]

to “MAIN”.

Press [SOURCE SELECT] to display the GUI Source

Select menu, then select “ ” (vpage 26).

Use ui to select the server including the le to be

played, then press ENTER or p.

Press ui to select the search item or folder, then

press ENTER or p.

Press

to select the le, then press

ENTER, p

or [1]

Playback starts once buffering reaches “100%”.

Adjust the items below.

Adjusting the master volume (vpage 62)

Selecting the surround mode (vpage 64)

Adjusting the Sound and Picture Quality

(vpage 67)

Use this procedure to play music ﬁles, image ﬁles or playlists.

Playing Network Audio, USB Memory Devices

Playing Files Stored on a Computer

When playing still picture (JPEG) ﬁles, ﬁles can also be selected

using the operation described below.

During playback, either press [TU 6] (previous ﬁle) or [TU 7]

(next ﬁle).

Connections to the required system and speciﬁc settings must be

made in order to play music ﬁles (vpage 22).

Before starting, you must launch the computer’s server software

and set the ﬁles as server contents. For details, see the operating

instructions of your server software.

Depending on the size of the still picture (JPEG) ﬁle, some time may

be required for the ﬁle to be displayed.

The order in which the tracks/ﬁles are displayed depends on the

server speciﬁcations. If due to the server speciﬁcations the tracks/

ﬁles are not displayed in alphabetical order, searching by the ﬁrst

letter may not work properly.

WMA Lossless ﬁles can be played when using a server supporting

transcoding, such as Windows Media Player Ver. 11.

Use the RESTORER mode to expand the low and high frequency

components of compressed audio ﬁles and achieve a richer sound

(vpage 71). The default setting is “Mode 3”.

The time (default : 30 sec) for which the GUI menus are displayed

can be set at “GUI” – “NET/USB” (vpage 41).

Use <STATUS> to switch between displaying the title name, artist

name or album name.

•

To stop (vpage 62)

Stopping playback temporarily (vpage 62)

Selecting tracks (vpage 63)

Playing repeatedly (vpage 63)

Playing in random order (vpage 63)

Searching pages (vpage 63)

Searching by ﬁrst letter (vpage 63)

Button located on both the main unit

and the remote control unit

BUTTON

Button only on the main unit

Button only on the remote control unit

[BUTTON]

Symbols used to indicate buttons in this manual

Playback

ui p

ENTER

[DEVICE

SELECT 1]

[DEVICE

SELECT 2]

[SOURCE

SELECT]

[NET/USB]

[1]

uip

ENTER

[TU 6]

[TU 7]

[NET/USB]

Front Rear

[USB]

Sub remote control unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-3310 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-3310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info